Difference between revisions of "Effects/Fostex/DE-1"
m |
m |
||
| Line 39: | Line 39: | ||
<!-- | <!-- | ||
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards] | There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards] | ||
| − | -- | + | --> |
---- | ---- | ||
<references/> | <references/> | ||
Revision as of 11:33, 18 December 2006
Fostex DE-1
Contents
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual
Insert Cable
Photo
Typical Insert Cable Hosa STP204
Insert Cable Connections to the PS1 Power Stand (Classic) / Model I
Links
Connections at the Fostex DE-1
Excerpt from the Fostex DE-1 Manual Page 14
Controlling the Wet/Dry Mix
Excerpt from the Fostex DE-1 Manual Page 14
It seems that with the Fostex DE-1 you can use two channels when you operate in "stereo" mode. These illustrations are based on using Channel One on the Fostex unit.
Note - If you want to use both channels you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).