Difference between revisions of "Effect / Alesis / MidiVerb4"
(first ed) |
m (type in image name) |
||
| Line 20: | Line 20: | ||
Excerpt from the Alesis MidiVerb4 Manual (page 18) | Excerpt from the Alesis MidiVerb4 Manual (page 18) | ||
| − | [[Image: | + | [[Image:alesisXVerbPS1-2Channel.png]] |
* Blue "Ring" is Send from the Bose System | * Blue "Ring" is Send from the Bose System | ||
* Purple "Tip" is the Return to the Bose System | * Purple "Tip" is the Return to the Bose System | ||
Revision as of 05:01, 13 January 2007
Alesis MidiVerb
Contents
Reference
Alesis MidiVerb4 Connections
One {PS1} Channel
Excerpt from the Alesis MidiVerb4 Manual (page 18)
- Blue "Ring" is Send from the Bose System
- Purple "Tip" is the Return to the Bose System
You will need one Insert Cable
Two {PS1} Channels
Excerpt from the Alesis MidiVerb4 Manual (page 18)
- Blue "Ring" is Send from the Bose System
- Purple "Tip" is the Return to the Bose System
You will need two Insert Cables. One for each Channel.
PS1 Power Stand (Classic) / Model I Connections
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual
Insert Cable
Typical Insert Cable Hosa STP204
A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.
and this is connected to one of the PS1 Powerstand Insert Points
