Difference between revisions of "Bose T4S and T8S ToneMatch® Mixers Compared to Bose T1® ToneMatch Audio Engine"
m |
m |
||
(14 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | ;Note: The {{ToneMatch Mixers}} are compatible with the {{L1PS}}s (announced October 2020). | |
+ | The {{T1}} requires two connections to the {{L1PS}}s: one for power, one for audio. Please see: [[T1 Compatibility With L1 Pro Systems]] | ||
− | + | ||
− | + | ;Here's a quick rundown of the additions and changes: | |
* Stereo outputs and processing | * Stereo outputs and processing | ||
− | ** Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve | + | ** T4S: Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve |
+ | ** T8S: Two XLR analog outputs two analog 1/4" Tip-Ring-Sleeve | ||
** Pan | ** Pan | ||
+ | |||
+ | * Combo inputs | ||
+ | ** T4S: Channels 1, 2, 3 and 4 all have combo XLR-1/4" inputs | ||
+ | ** T8S: Channels 1, 2, 3, 4, 5, 6, 7 and 8 all have combo XLR-1/4" inputs | ||
+ | * Auxilliary inputs (routed to Main with Level and Pan controls) | ||
+ | ** T4S: Aux Channels 5 and 6 are 1/4" Tip-Ring-Sleeve | ||
+ | ** T8S: Aux Channel 9 and 10 that are 1/4" Tip-Ring-Sleeve | ||
* Headphone jack | * Headphone jack | ||
* 6mm (1/4"-20) threaded insert at the bottom for use with mounting hardware, | * 6mm (1/4"-20) threaded insert at the bottom for use with mounting hardware, | ||
* Tap-tempo delay | * Tap-tempo delay | ||
− | * Dedicated Aux | + | * Aux Outputs |
− | * | + | ** Dedicated Reverb on Aux 1 |
+ | *** T4S: Additional Aux out - Aux 2 | ||
+ | *** T8S: Additional Aux outs - Aux 2 Aux 3, Aux 4 | ||
* 3-band Parametric EQ per channel | * 3-band Parametric EQ per channel | ||
− | * Master out 6-band EQ | + | * Master out 6-band EQ |
+ | * Higher signal output (approximately +10 dB) and this provides greater compatibility with the {{F1}} | ||
* USB playback (WAV/MP3) from thumb drives | * USB playback (WAV/MP3) from thumb drives | ||
* New industrial design | * New industrial design | ||
Line 18: | Line 30: | ||
− | Removed | + | Removed/Changed |
− | |||
− | |||
− | |||
+ | * Removed the L1® Cylindrical Radiator® stand and the mic stand adapter (replaced by the common 1/4"-20 insert) | ||
+ | * Removed the preamp outs based on customer feedback that they were seldom used | ||
+ | * {{T4S/T8S Scenes Changed}} | ||
+ | * New Reverb engine | ||
+ | ** Global Reverb Time parameter is expressed in percentage compared to the T1® in seconds ([[T4S/T8S_ToneMatch%C2%AE_Mixer#Reverb_Settings|details]]) | ||
+ | * Channel 4 (T4S compared to T1) | ||
+ | <table> | ||
+ | <tr><th width=50%>T4S ToneMatch Mixer</td><th>T1 ToneMatch Audio Engine</td></tr> | ||
+ | <tr> | ||
+ | <td> | ||
+ | <big>Channel 4</big> | ||
+ | * Combo 1/4" (6.3mm) / XLR input. This single input is mono and can be panned. | ||
+ | * XLR input | ||
+ | * Phantom Power | ||
+ | * Support for bare piezo pickups (pickups without a preamp) | ||
+ | * Full support for ToneMatch Presets, zEQ, ParaEQ, Effects, Reverb | ||
+ | * Can be routed to Aux Outputs 1 and/or 2 | ||
+ | </td> | ||
+ | <td> | ||
+ | <big>Channel 4</big> | ||
+ | * A single mono channel with two 1/4" (6.3mm) balanced line-level inputs that were immediately converted to mono. | ||
+ | * No XLR input | ||
+ | * No phantom power | ||
+ | * No support for bare piezo pickups (pickups without a preamp) | ||
+ | * Full support for ToneMatch Presets, zEQ, ParaEQ, Effects, Reverb | ||
+ | * Can be routed to Aux Output 1 | ||
+ | </td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><big>Aux Inputs Channels 5/6</big> | ||
+ | * Two 1/4" (6.3mm) balanced line-level inputs | ||
+ | * Each input can be panned Left or Right | ||
+ | * Each input is routed directly to the Master Outputs | ||
+ | ** No processing (ToneMatch Presets, zEQ, ParaEQ, Effects, Reverb) | ||
+ | ** Cannot be routed to Aux 1 or 2 | ||
+ | * Each input level control is set using the Prefs | PAN/AUX settings | ||
+ | </td> | ||
+ | <td><big>No equivalent</big> | ||
+ | </td> | ||
+ | </tr> | ||
+ | </table> | ||
---- | ---- | ||
[[Category:T1]] | [[Category:T1]] | ||
[[Category:T4S]] | [[Category:T4S]] | ||
[[Category:T8S]] | [[Category:T8S]] | ||
+ | [[Category:Comparison]] |
Latest revision as of 01:38, 17 May 2021
- Note
- The T4S/T8S ToneMatch® Mixers are compatible with the L1 Pro System[1]s (announced October 2020).
The T1 ToneMatch Audio Engine requires two connections to the L1 Pro System[1]s: one for power, one for audio. Please see: T1 Compatibility With L1 Pro Systems
- Here's a quick rundown of the additions and changes
- Stereo outputs and processing
- T4S: Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve
- T8S: Two XLR analog outputs two analog 1/4" Tip-Ring-Sleeve
- Pan
- Combo inputs
- T4S: Channels 1, 2, 3 and 4 all have combo XLR-1/4" inputs
- T8S: Channels 1, 2, 3, 4, 5, 6, 7 and 8 all have combo XLR-1/4" inputs
- Auxilliary inputs (routed to Main with Level and Pan controls)
- T4S: Aux Channels 5 and 6 are 1/4" Tip-Ring-Sleeve
- T8S: Aux Channel 9 and 10 that are 1/4" Tip-Ring-Sleeve
- Headphone jack
- 6mm (1/4"-20) threaded insert at the bottom for use with mounting hardware,
- Tap-tempo delay
- Aux Outputs
- Dedicated Reverb on Aux 1
- T4S: Additional Aux out - Aux 2
- T8S: Additional Aux outs - Aux 2 Aux 3, Aux 4
- Dedicated Reverb on Aux 1
- 3-band Parametric EQ per channel
- Master out 6-band EQ
- Higher signal output (approximately +10 dB) and this provides greater compatibility with the F1 Model 812 Flexible Array Loudspeaker
- USB playback (WAV/MP3) from thumb drives
- New industrial design
- New magnetic cover
Removed/Changed
- Removed the L1® Cylindrical Radiator® stand and the mic stand adapter (replaced by the common 1/4"-20 insert)
- Removed the preamp outs based on customer feedback that they were seldom used
- There are eleven scenes available in the T4S/T8S ToneMatch® Mixers:
- Five Bose Scenes (that can be overwritten) and
- Six user scenes
- The T1® has eleven user read/writeable Scenes and five Bose read only Scenes.
- T1 Scenes backed up to a computer can not be restored to a T4S/T8S (different architecture for reverb)
- New Reverb engine
- Global Reverb Time parameter is expressed in percentage compared to the T1® in seconds (details)
- Channel 4 (T4S compared to T1)
T4S ToneMatch Mixer | T1 ToneMatch Audio Engine |
---|---|
Channel 4
|
Channel 4
|
Aux Inputs Channels 5/6
|
No equivalent |