Difference between revisions of "S1 Pro Aux Input for Guitar"
m |
m |
||
| Line 1: | Line 1: | ||
<div class="tocdiv"> | <div class="tocdiv"> | ||
<div>__TOC__</div> | <div>__TOC__</div> | ||
| − | <div> | + | <div><h3>Introduction</h3> |
; Connect a guitar with a preamp to the {{S1}} Aux input | ; Connect a guitar with a preamp to the {{S1}} Aux input | ||
Revision as of 01:02, 20 April 2019
Introduction
- Connect a guitar with a preamp to the S1 Pro System Aux input
If you have questions for comments about this article please see: S1 Pro Aux Input for Guitar discussion for this article
Guitar with Preamp or External Preamp
If your guitar has a preamp (has a volume control), you can connect it to the S1 Pro System Aux input. There are no Presets or Tone Controls or Reverb for the Aux input. You will rely on controls on the guitar or guitar preamp.
OR
Guitar Processor
Connect your guitar to the guitar processor.
Connect the guitar processor output to S1 Pro System Aux input using a cable like those shown above.
Guitar Processor with Headphone Output
If you have a guitar processor with a headphone output, you can connect that to the S1 Pro System Aux input.
