Difference between revisions of "Effects/Fostex/DE-1"
m (updated image of send/receive on DE-1 and slight changes to wording in section about having two channels) |
m (cleanup template notes) |
||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<big>''' Fostex DE-1 '''</big> | <big>''' Fostex DE-1 '''</big> | ||
Revision as of 19:45, 25 December 2006
Fostex DE-1
Contents
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual
Insert Cable
Photo
Typical Insert Cable Hosa STP204
Insert Cable Connections to the PS1 Power Stand (Classic) / Model I
Links
Connections at the Fostex DE-1
Excerpt from the Fostex DE-1 Manual Page 14
Controlling the Wet/Dry Mix
Excerpt from the Fostex DE-1 Manual Page 14
With the Fostex DE-1 you can use two channels when you operate independently. These illustrations are based on using Channel One in mono mode. Since the PS1 Power Stand (Classic) / Model I operates in mono, there is no particular advantage to running stereo.
Note - If you want to use two effects channels with the DE-1 you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).