Difference between revisions of "Effects/Lexicon/MX200"

@@ Line 1: / Line 1: @@
-<big>''' Fostex DE-1  '''</big>
 === Connections at the {{PS1}} ===
 Serial Effects - Excerpt from the {{PS1}} Manual
@@ Line 15: / Line 13: @@
 Links
-* [http://www.fostex.com/support/pdf/fostex/de1/de1_owners_manual.pdf Fostex DE-1 Owners Manual]
+* [http://www.lexiconpro.com/Product_Downloads/MX200Manual_B.pdf Lexicon MX200 Users Manual]
+=== Connections at the Lexicon MX200  ===
+With the Lexicon MX200 you can use two channels when you operate independently. These illustrations are based on using both channels to support two {{PS1}}s.
+[[Image:LexiconMX200Connect.png]]
+=== Routing with Two {{PS1}}s ===
-=== Connections at the Fostex DE-1 ===
+[[Image:LexiconMX200RoutingDualMono.gif]]
-Excerpt from the Fostex DE-1 Manual Page 14
-[[Image:Fostex DE-1 SendReceive.gif]]
+<!--
 === Controlling the Wet/Dry Mix ===
 Excerpt from the Fostex DE-1 Manual Page 14
 [[Image:LexiconMX200Connect.png]]
+-->
-With the Lexicon MX200 you can use two channels when you operate independently. These illustrations are based on using both channels to support two {{PS1}}s.
-Note - If you want to use two effects channels with the DE-1  you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
 There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/5841038914?r=5841038914#5841038914 Original post in the Bose® Musicians Community Message Boards]

Revision as of 20:20, 25 December 2006