PS1 Powerstand Connections/Line Out/XLR

From Bose Portable PA Encyclopedia
Revision as of 14:01, 14 November 2006 by ST (talk | contribs) (first ed)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

XLR Line Outs Channels 1 and 2

  • post trim (+4 dBu nominal)

For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). Most professional consoles will have a switchable -20 dB pad at the inputs to lower the input level if required.

The XLR Line out is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to daisy-chain PS1 Power Stand (Classic) / Model Is a pad is recommended.


Try moving the mouse over the image below. If you have Java installed, you will see notes related to what you touch with the mouse.

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=PS1_Powerstand_Connections/Line_Out/XLR&oldid=2892"