S1 Pro Power Switch

Issue

What switch position is standby?

Environment

S1 Pro System with battery installed

Resolution

When you are not using the S1 Pro System you can leave the power switch in the standby position (middle position) or the quick-charge position (bottom position).
If the S1 Pro System is not connected to AC power, it won't matter if you choose the middle or bottom position.

Switch position in transit

You can put the S1 Pro System power switch in the bottom position (quick charge) position when transporting the unit. This may reduce the likelihood the switch will get bumped to the on position.

More detail.

Cause

Not applicable.

---