S1 Pro Power Switch

Issue

What switch position is standby?

Environment

S1 Pro System with battery installed

Resolution

In Use

Set the power switch to the top position (on).

Standby

When you are not using the S1 Pro System you can leave the power switch in the standby position (middle) or the quick-charge position (bottom).
If the S1 Pro System is not connected to AC power, it won't matter if you choose the middle or bottom position.

In Transit

You can put the S1 Pro System power switch in the bottom position (quick charge) position when transporting the unit. This may reduce the likelihood the switch will get bumped to the on position.

Charging

When you are charging the S1 Pro System you can put the power switch in the standby position (middle) or the quick-charge position (bottom).

More detail.

Cause

Not applicable.

---