Difference between revisions of "Effect / Alesis / PicoVerb"
({{:PS1 Powerstand/Effects/Serial}}) |
(updated images for one channel and two channels) |
||
| Line 7: | Line 7: | ||
Excerpt from the Alesis PicoVerb Manual | Excerpt from the Alesis PicoVerb Manual | ||
| − | http://bose.infopop.cc/eve/forums/a/ga/ul/9501082142/inlineimg/Y/alesisNanoVerb1.gif | + | <!-- http://bose.infopop.cc/eve/forums/a/ga/ul/9501082142/inlineimg/Y/alesisNanoVerb1.gif --> |
| − | + | [[Image:alesisXVerbPS1-1Channel.png]] | |
| − | Purple "Tip" is the Return to the Bose System | + | * Blue "Ring" is Send from the Bose System |
| + | * Purple "Tip" is the Return to the Bose System | ||
From Page 15 in the Alesis PicoVerb Manual | From Page 15 in the Alesis PicoVerb Manual | ||
| Line 18: | Line 19: | ||
It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects. | It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects. | ||
| − | + | [[Image:alesisXVerbPS1-2Channel.png]] | |
| + | |||
| + | Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max). | ||
{{:PS1 Powerstand/Effects/Serial}} | {{:PS1 Powerstand/Effects/Serial}} | ||
Revision as of 06:09, 13 January 2007
Alesis PicoVerb
Contents
Reference
Alesis PicoVerb Connections
Excerpt from the Alesis PicoVerb Manual
- Blue "Ring" is Send from the Bose System
- Purple "Tip" is the Return to the Bose System
From Page 15 in the Alesis PicoVerb Manual
Two Channels
It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects.
Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual
Insert Cable
Typical Insert Cable Hosa STP204
A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.
and this is connected to one of the PS1 Powerstand Insert Points
There is more discussion in the Original post in the Bose® Musicians Community Message Boards</ref>