Difference between revisions of "HeadRush Prime to L1 Pro"
m |
m |
||
| Line 5: | Line 5: | ||
* Don't use the HeadRush XLR outputs to the L1 Pro XLR inputs. The HeadRush XLR Outputs are line-level and too hot for the L1 Pro XLR inputs (which are designed for microphone-level signal sources. | * Don't use the HeadRush XLR outputs to the L1 Pro XLR inputs. The HeadRush XLR Outputs are line-level and too hot for the L1 Pro XLR inputs (which are designed for microphone-level signal sources. | ||
| − | [[File:HeadRush Prime to L1 | + | [[File:HeadRush Prime to L1 Pro1.jpg|600px]] |
* On the HeadRush Prime, you can leave the 1/4 output at the default Line Level Output.<br>You'll find that under Global | Audio Tab | 1/4" Level. | * On the HeadRush Prime, you can leave the 1/4 output at the default Line Level Output.<br>You'll find that under Global | Audio Tab | 1/4" Level. | ||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 03:00, 2 November 2023
Q: How do I connect a HeadRush Prime pedalboard to an L1 Pro
A:
- HeadRush L (mono) 1/4 inch (6.3 mm) Tip-Ring-Sleeve output to L1 Pro channel 3 (1/4 inch (6.3 mm) Tip-Ring-Sleeve).
- Don't use the HeadRush XLR outputs to the L1 Pro XLR inputs. The HeadRush XLR Outputs are line-level and too hot for the L1 Pro XLR inputs (which are designed for microphone-level signal sources.
- On the HeadRush Prime, you can leave the 1/4 output at the default Line Level Output.
You'll find that under Global | Audio Tab | 1/4" Level.
References: