Difference between revisions of "L1® Classic and Model I Acoustical Output"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
Quoting Neil-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/4806048934/m/9341016135 L1® Classic and Model I Acoustical Output]
+
<noinclude>{{Bose Reviewed}}</noinclude>
 +
The maximum output volume of the {{Classic}} and the {{Model I}} are virtually identical.
  
−
Some of you that have read through the product specifications for the {{Classic}} and {{Model I}} system may have wondered how the systems are able to achieve the same acoustical output given the differences in the power amplifier configuration. We wanted to provide you with further explanation on how this is indeed possible.
+
In the {{Classic}}, the {{L1 CR}} is powered by two (2) 250 Watt amplifiers. In the Model I, the {{L1 CR}} is powered by one (1) 250 Watt amplifier. Both the Classic and the Model I use a second 250 Watt amplifier to power one or two B1 bass modules.
  
−
The {{Model I}} features one dedicated 250 watt RMS amplifier that powers the {{L1 CR}} and an additional 250 watt RMS amplifier that powers up to two B1 Bass Modules. This brings the total system power handling to 500 watts.
+
Although these numbers serve as a point of reference they do not tell the whole story. During the design of the {{Model I}} the impedance of the {{L1 CR}} was lowered. As a result of the lower impedance, a single 250W amplifier now powers the system to within 1.75 dB of the max SPL of the {{Classic}}. Several other changes were made to the signal processing and acoustical sections to further reduce this small difference. Particular attention was paid to this change and many A/B comparisons were conducted by Bose to confirm that there was no significant audible difference between the two systems.  
−
 
 
−
In contrast the {{Classic}} had two 250 watt RMS amplifiers each dedicated to driving one half of the {{L1 CR}} and an additional 250 watt amp that powered up to two B1 Bass Modules. The total system power handling is listed at 750 watts.
 
−
 
 
−
Although these numbers serve as a point of reference they do not tell the whole story. During the design of the {{Model I}} the impedance of the L1 Line array was lowered. As a result of the lower impedance, a single 250W amplifier now powers the system to within 1.75 dB of the max SPL of the {{Classic}}. We paid particular attention to this change and conducted many A/B comparisons to confirm that there was no significant audible difference between the two systems. When used in the field with program material, the volume difference between the two systems is unnoticeable.
 
−
 
 
−
For those that own both an L1® classic and a model I system it is important that the correct Cylindrical Radiator® loudspeakers are matched to their respective power stands. For example if you inserted a model I radiator into an L1® classic power stand you would notice a (-6dB)difference in acoustical output. Both the L1® model I power stand and radiators contain an orange sticker which serve as a easy identifier. If you are purchasing an open box system this is something to keep in mind.
 
−
 
 
−
I hope that you found this information helpful.
 
−
 
 
−
Neil-at-Bose
 
  
 
<noinclude>
 
<noinclude>

Latest revision as of 15:17, 26 March 2017

This Page Reviewed By Bose

The maximum output volume of the L1 Classic and the L1 Model I are virtually identical.

In the L1 Classic, the L1 Cylindrical Radiator® loudspeaker is powered by two (2) 250 Watt amplifiers. In the Model I, the L1 Cylindrical Radiator® loudspeaker is powered by one (1) 250 Watt amplifier. Both the Classic and the Model I use a second 250 Watt amplifier to power one or two B1 bass modules.

Although these numbers serve as a point of reference they do not tell the whole story. During the design of the L1 Model I the impedance of the L1 Cylindrical Radiator® loudspeaker was lowered. As a result of the lower impedance, a single 250W amplifier now powers the system to within 1.75 dB of the max SPL of the L1 Classic. Several other changes were made to the signal processing and acoustical sections to further reduce this small difference. Particular attention was paid to this change and many A/B comparisons were conducted by Bose to confirm that there was no significant audible difference between the two systems.


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=L1®_Classic_and_Model_I_Acoustical_Output&oldid=18490"