Difference between revisions of "Mixer / Mackie / CFX MkII"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(first edition)
 
m (Mixer/Mackie/CFX MkII moved to Mixer / Mackie / CFX MkII: naming convention)
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
<!-- Use this an an outline for a mixer page -->
+
{{Classic icon}}{{Model I icon}}
<!-- Please link to external images, do not upload them to the server -->
 
 
<big>'''Mackie CFX Mk II Mixer'''</big>
 
<big>'''Mackie CFX Mk II Mixer'''</big>
  
Line 6: Line 5:
 
Simplest thing that could possibly work.
 
Simplest thing that could possibly work.
  
''' Use the ¼ inch phone jack outputs not the XLR '''
+
[[Image:Mackecfxmkii.png]]
 +
 
 +
 
 +
''' {{Use1/4}} '''
  
  
 
== Outputs ==
 
== Outputs ==
XLR Balanced +4  
+
<!-- delete anything that is not applicable -->
 +
=== XLR Balanced +4 ===
 +
 
 
{{TooHotForPS1}}
 
{{TooHotForPS1}}
  
XLR Balanced with built-in-pad
+
=== &frac14; Inch with suitable output===
{{UsePadSetting}}
+
for PS1 Powerstand Channel 1 or 2 inputs
  
&frac1/4 Inch with suitable output for PS1 Powerstand Channel 1 or 2 inputs
 
 
{{RunTROrTRSUnbalanced}}
 
{{RunTROrTRSUnbalanced}}
  
Line 25: Line 28:
 
* http://bose.infopop.cc/eve/forums/a/ga/ul/2231059053/inlineimg/Y/MackiCFXMkIIOutput.gif
 
* http://bose.infopop.cc/eve/forums/a/ga/ul/2231059053/inlineimg/Y/MackiCFXMkIIOutput.gif
  
More Notes
+
 
  
  
Line 32: Line 35:
 
----
 
----
 
<references/>
 
<references/>
 
+
[[category:Mackie]]
 
[[category:Mixer]]
 
[[category:Mixer]]

Latest revision as of 03:09, 21 December 2008

Classic This information is applicable to the L1® Classic
L1 Model I This information is applicable to the L1 Model I

Mackie CFX Mk II Mixer

Summary

Simplest thing that could possibly work.

Mackecfxmkii.png


Use the ¼ inch phone jack (Tip-Sleeve) outputs to


Outputs

XLR Balanced +4

The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.

{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}}

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

Tip-Ring-Sleeve to Tip-Ring-Sleeve

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.


Links: