Search results

Create the page "1/4 TS" on this wiki! See also the search results found.

• L1® Model I / FAQ
  ...the secondary channels (3 and 4). To set the gain for the primary channels 1 and 2: To set the gain for channels 3 and 4 simply adjust the input gain of the individual channel. These channels don'
  60 KB (9,859 words) - 05:33, 26 March 2017
• Kemper Profiler to L1 Pro
  * All 1/4-inch outputs are unbalanced, line-level * All 1/4-inch inputs
  5 KB (706 words) - 01:49, 5 January 2023
• Balanced vs Unbalanced
  ...phones with Tip-Ring-Sleeve plugs]][[File:14 to xlr male.jpg|thumb|100px|1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR]][[File:14 insert.jpg|thumb|100px|Inse One source of confusion is that a cable with a {{1/4 TRS}} jack on one end may be used for several applications (examples)
  8 KB (1,267 words) - 17:43, 7 February 2023
• Stereo Mixer to Mono L1®
  ===== XLR Mixer to 1/4 Tip-Ring-Sleeve L1® ===== {{XLR Female to 1/4 TRS}}
  8 KB (1,188 words) - 23:23, 8 April 2022
• L1® T1 ToneMatch® Audio Engine / FAQ
  ...e ToneMatch audio engine's master output jack to the input of channel 3 or 4 on the Model I power stand. Yes. +48V phantom power can be applied to channels 1 – 3.
  31 KB (4,908 words) - 04:28, 9 April 2017
• Kemper Profiler
  [https://www.youtube.com/watch?v=bT9Gg7yRgZE Kemper Tone Tips - Volume 1 - Testing an Amp Profile] The Profiler Head and Rack take about 1 minute and 15 seconds to boot. The Stage is a lot faster and takes about 15
  24 KB (3,721 words) - 12:54, 8 August 2023
• T1 ToneMatch® Audio Engine
  [[Image:T1 Inputs.png|T1 Inputs 1,2,3 and 4/5]] The following notes about Channels 1,2,3, 4/5 are from Hilmar-at-Bose spread out over several posts in [http://bose.inf
  13 KB (1,983 words) - 11:55, 22 May 2018
• S1 Pro as Monitor with Third Party Mixer and L1
  You can connect using the {{1/4 TRS}} outputs from a mixer. ==== {{1/4 TRS}} Outputs ====
  2 KB (357 words) - 22:23, 16 November 2019
• L1® Compact
  ...system.html#v=l1_compact_black"><img src="http://toonz.ca/bose/wiki/images/4/4e/CompactFullSize.jpg" alt="L1® Compact" border="0" ></a></div> Announced: April 1 2009
  27 KB (4,306 words) - 01:35, 20 May 2021
• Bose S1 Pro Compared to Bose L1® Compact
  <td>Total system weight 13.4 kg (30.2 lb) <li>Extensions (each): 1.1 kg (2.3 lb) </li>
  6 KB (861 words) - 01:41, 7 March 2022
• T1 ToneMatch® Audio Engine / Microphone into Channel 4
  ...need to supply that too as there is no phantom power on {{T1 nl}} Channel 4/5. ...vocal style. The picture is to show you that the trim setting for Channel 4/5 will probably be higher than Channel 3. This does not affect the sound qu
  3 KB (452 words) - 17:25, 9 December 2022
• Bose L1 Pro8 Compared to L1 Compact
  <li>Mid-High array and extension: 4 kg (8.9 lb) </li> <td>Total system weight 13.4 kg (30.2 lb)
  7 KB (1,045 words) - 15:04, 12 June 2021
• LR Baggs Session DI to ToneMatch Mixer T1/T4S/T8S
  ...the option to connect the LR Baggs Session DI to the T4S using an XLR or 1/4 inch (6.3 mm) Tip-Sleeve cable. === 1/4 inch (6.3mm) Tip-Sleeve Unbalanced===
  4 KB (656 words) - 15:13, 3 February 2020
• Stereo to Mono Conversion
  ...Sto2x14TS.png|200px|Hosa CMP159 Stereo Breakout, 3.5 mm TRS to Dual 1/4 in TS, 10-Feet ]] ...he output is balanced, use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve or XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable
  4 KB (640 words) - 19:22, 20 February 2024
• T1 ToneMatch® Audio Engine / Connections to Compact
  ...o {{Compact}} channel 2 {{1/4 TRS}}. Connecting to the {{Compact}} Channel 1 is not recommended because that channel has a built-in vocal microphone {{T [[File:14trstotrs.jpg|200px|right|{{1/4 TRS}}]]
  1 KB (186 words) - 11:48, 30 August 2018
• T1 ToneMatch® Audio Engine / Connections to S1 Pro
  [[File:14trstotrs.jpg|200px|right|{{1/4 TRS}}]] ...lts use a {{1/4 TRS}} cable for a balanced connection. You can use a {{1/4 TS}} cable, but you will lose up to -6 dB in signal strength and you may pick
  1 KB (182 words) - 12:02, 23 February 2019
• S1 Pro as Monitor with T1
  [[File:14trstotrs.jpg|200px|right|{{1/4 TRS}}]] ...lts use a {{1/4 TRS}} cable for a balanced connection. You can use a {{1/4 TS}} , but you will lose up to -6 dB in signal strength and you may pick up li
  3 KB (433 words) - 22:23, 16 November 2019
• S1 Pro to L1 Model II
  {{Model II}} Analog input {{1/4 TRS}}. Use an {{1/4 TRS}} cable. You can use an {{1/4 TS}} cable but you may lose up to -6dB
  1 KB (213 words) - 22:23, 16 November 2019
• L1® Model II Documentation
  * New B1 is 25.1 lbs. ...uts are also balanced, but can be used unbalance as well. So all in all Ch 1,2 & 3 support.
  4 KB (644 words) - 05:26, 26 March 2017
• L1® Compact / Connection from a Mixer
  You can run a stereo source to the 1/8 input or the RCA jack inputs. If you have a stereo source use the 1/8 inch stereo connection or the RCA jack inputs. Examples of stereo sources
  2 KB (245 words) - 06:42, 26 March 2017

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)