Search results

Jump to: navigation, search

Create the page "Settings" on this wiki! See also the search results found.

Page title matches

Page text matches

  • T4S/T8S ToneMatch® Mixer
    ...ge. This is normal operation. If you want to run the trim control at lower settings we recommend using a preamp or simple stomp box level booster. ;Note: Routing settings for USB from PC are also applied to USB A playback. See [[{{PAGENAME}}#USB
    9 KB (1,484 words) - 23:55, 13 December 2023
  • L1® Model I / FAQ
    ...system, made adjustments to improve the sound quality and then saved those settings as ToneMatch presets. Now the high level of tone customization most musicia There are three gain settings for the primary channels (1 and 2) and two gain settings for the secondary channels (3 and 4). To set the gain for the primary chann
    60 KB (9,859 words) - 05:33, 26 March 2017
  • T1 ToneMatch® Audio Engine / Digital Delay for Second L1®
    ;Update: The principles and settings shown in this article apply equally to the {{T1}} and {{ToneMatch Mixers}} == Connections and Settings ==
    12 KB (2,012 words) - 10:58, 5 January 2023
  • Kemper Profiler
    === Wah Settings === ...sheets/d/1uR_aaV5FjKoCtRR8Vqhuu6H4CFyzkFlE1oC10ahN2PE/edit?usp=sharing Wah Settings Spreadsheet]
    24 KB (3,721 words) - 12:54, 8 August 2023
  • Tonematch Mixers / Compressor
    <noinclude>[[Image:T1CompGate.png|right|screen shot of T1™ Comp/Gate settings]] Note: To bypass the Comp/Gate settings, press the Type button. Press it again to activate.
    7 KB (1,047 words) - 15:58, 16 June 2019
  • Sennheiser EW-D
    ==Settings== Recommended settings for a unity gain link:
    5 KB (897 words) - 14:39, 13 April 2022
  • Is the B2 Bass Module Compatible with the L1® Classic or Model I
    If you have a Classic, you will get sound in all three settings, but only '''Normal''' is supported. The other two do not convey any value There are three settings:
    7 KB (1,259 words) - 08:44, 26 March 2017
  • S1 Pro as Monitor with Third Party Mixer and L1
    ==== {{S1}} Settings ==== [[File:S1 Pro Settings for mixer.jpg|250px|S1 Pro inputs]]
    2 KB (357 words) - 22:23, 16 November 2019
  • L1® T1 ToneMatch® Audio Engine / FAQ
    ...tions. Five Bose scenes are built into the ToneMatch audio engine: Factory settings, Singer/songwriter, DJ/playback, Drums and bass, and Electric works. ...ene is a "snapshot" of the complete state of the T1 ToneMatch audio engine settings at any given moment. You can store, recall and edit up to five different us
    31 KB (4,908 words) - 04:28, 9 April 2017
  • R1 Remote
    ...d the user then disconnects the R1 remote control, it will retain the last settings of the R1 remote control before you disconnected it. This is helpful in the '''Hint:''' Many players find it helpful to note their gain settings -- trim on the PS1, channel volume and master volume on the R1 -- and make
    11 KB (1,902 words) - 15:41, 23 April 2017
  • T1 ToneMatch® Audio Engine Reset to Factory Settings
    Sometimes you want to start fresh and restore your T1® to the settings when it left the factory. # Under the display, turn first knob until you see Factory Settings <br>
    709 bytes (108 words) - 16:48, 11 January 2020
  • T1 to T8S to Two L1 Model II
    ...er inputs. You will need to control T1 Pan and Level using the T8S PAN/AUX settings. === {{T8S}} PAN/AUX Input Settings ===
    2 KB (290 words) - 12:39, 10 October 2019
  • S1 Pro as Monitor with T1
    [[File:S1 Pro Settings for mixer.jpg|250px|S1 Pro inputs]] =={{S1}} settings==
    3 KB (433 words) - 22:23, 16 November 2019
  • Hammered Dulcimer
    ===Settings for EQ and compression=== EQ settings for the HD can vary a bit with each gig, though they are generally close to
    4 KB (633 words) - 15:56, 14 October 2008
  • DJ
    If you have a {{T1}} these settings can be used in conjunction with all of the other suggestions below. === Settings USB from Computer to Channel 4/5 ===
    5 KB (788 words) - 06:27, 2 December 2018
  • T4S ToneMatch Mixer to S1 Pro system
    == T4S Settings == == S1 Pro Settings ==
    3 KB (510 words) - 17:52, 2 May 2022
  • Troubleshooting
    If you have all settings on the {{PS1}} set straight-up (including the {{R1}}), with nothing connect ...mely'' loud. When you provide an input signal source with appropriate trim settings the hiss should be inaudible.
    7 KB (1,133 words) - 16:32, 13 October 2010
  • Gig Report / House Concert Fundraiser
    The {{T1r}} Scenes made it easy to switch between settings for the different acts. ...had arrived early, found the {{T1r}}, figured it out, and tweaked all the settings before I got there. All I did was suggest some different Presets to try for
    9 KB (1,752 words) - 19:00, 4 January 2009
  • Pedal Steel Guitar
    Brian Terry provided this information about his settings with his Pedal Steel Guitar and his {{Model II}} and {{T1}}. ...t PLEASE NOTE that I'm using a Peavey Profex 11 with Newmans, Larry Sasser Settings and Mullen S10 Royal Precision pedal Steel with Goodrich vol pedal So here
    2 KB (257 words) - 02:35, 21 May 2013
  • L1® Compact
    ==== Differences in Volume Settings ==== ...l from say a Model II to an L1 Compact system with no additional change of settings on the T1.
    27 KB (4,306 words) - 01:35, 20 May 2021

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Special:Search"