Difference between revisions of "Template:NL4 Cable"
m (ST moved page Template:NL4 to Template:NL4 Cable) |
m (Ref - Hilmar-at-Bose https://www.bosepro.community/g/portable/topic/speakon-cable?reply=18197182792010845#18197182792010845) |
||
| Line 4: | Line 4: | ||
What you need as a 4-wire Speakon, i.e. all 4 pins of the NL4 plugs need to be connected. The pins are named 1+, 1-, 2+, and 2-. The connection is one-to-one, for example, 2+ on one plug goes to 2+ on the other plug. | What you need as a 4-wire Speakon, i.e. all 4 pins of the NL4 plugs need to be connected. The pins are named 1+, 1-, 2+, and 2-. The connection is one-to-one, for example, 2+ on one plug goes to 2+ on the other plug. | ||
| − | The wires inside the cable are usually arranged in a square pattern. Very long cable work a little bit better if the two signal pairs are connected diagonally like this | + | The wires inside the cable are usually arranged in a square pattern. Very long cable work a little bit better if the two signal pairs are connected diagonally like this<ref>Source: [https://www.bosepro.community/g/portable/topic/speakon-cable?reply=18197182792010845#18197182792010845 Hilmar-at-Bose]</ref>: |
<html> | <html> | ||
<style> | <style> | ||
Revision as of 00:07, 28 June 2018
- Bose B1 and B2 cables are NL4 cables
You can use cables that are functionally equivalent.
What you need as a 4-wire Speakon, i.e. all 4 pins of the NL4 plugs need to be connected. The pins are named 1+, 1-, 2+, and 2-. The connection is one-to-one, for example, 2+ on one plug goes to 2+ on the other plug.
The wires inside the cable are usually arranged in a square pattern. Very long cable work a little bit better if the two signal pairs are connected diagonally like this[1]:
| 1+ | 2+ |
| 2- | 1- |
- 2+ and 2-
The Power Stand detects resistors in the Bass Module across (2+ and 2-) that identify if the Bass Module is a B1 or B2.
- If B1, then adding a second B1 is detected and the Power Stand responds accordingly
- If B2, the setting on the Bass Level switch changes the resistance and the Power Stand responds accordingly.
- ↑ Source: Hilmar-at-Bose