ToneMatch® Mixer / Scenes

From Bose Portable PA Encyclopedia FAQ & Wiki
Jump to: navigation, search

T1®  This information is applicable to the T1 ToneMatch® audio engine
T4S This information is applicable to the T4S ToneMatch® mixer
T8S This information is applicable to the T8S ToneMatch® mixer

You can save all your ToneMatch Mixer settings as a Scene.  Think of it as a snapshot. You can have up to ten User Scenes.

A Scene captures all your setting except input trim and channel and master volume controls.

Settings not captured in a Scene


It's easy to create and recall Scenes so use them to back up your settings so can recall them when you need them.


Working with Scenes

T1® Scenes - Screen shots of the T1 ToneMatch® Audio Engine Owner's Guide (62 pages) - pages 32, 33, 34, 35

T1ManualScenes01.gif

T1ManualScenes02.gif

T1ManualScenes03.gif

T1ManualScenes04.gif

Save and Retrieve Your Scenes

In the L1® Updater software, Saving is called "Backup" and retrieving is "Download"

Get the L1® Updater Software

ToneMatch® Updater Software application. (two versions available)


Connection from Computer to T1 ToneMatch® Audio Engine

Here is an excerpt from the T1 ToneMatch® Audio Engine Owner's Guide (62 pages)

T1USBCable.gif

Here is a close up of the ends of the cable.

{{#Click:http://www.amazon.com/Belkin-F3U133-10-Hi-Speed-Cable-Feet/dp/B00004Z5M1%7CImage:USBAtoUSBB.jpg%7COrder on Amazon}}

Using the T1 ToneMatch® Audio Engine and the L1® Updater Software to backup your scenes

User Scenes

L1UpdaterUserScenes01.png


L1UpdaterUserScenes02.png

Shared Scenes

L1UpdaterSharedScenes01.png

L1UpdaterSharedScenes02.png

Factory Scenes

L1UpdaterFactoryScenes01.png



T4S/T8S USB A Playback

Why do USB A playback settings for volume and mute change when I change Scenes?
Scenes are a snapshot of all the ToneMatch mixer settings at the time when you save the Scene including settings for USB A Playback.
Exceptions
  • Trim and Volume controls are not included in the Scene.
  • If you are playing a song via USB A playback, the song will continue to play when you switch Scenes



If you have Scenes with different settings for USB A Playback volume, switching from Scene to Scene will load the different settings for USB A Playback
Example
  1. Scene: User Scene One
    • Setting USB A Playback volume: Mute
  2. Scene: User Scene Two
    • Setting USB A Playback volume: 25%
  3. Scene: User Scene Three
    • Setting USB A Playback volume: 50%

If you switch from User Scene Three to User Scene Two while using USB A Playback, the volume will change from 50% to 25%.

If you switch from User Scene Three to User Scene One while using USB A Playback, the volume will change from 50% to Mute.

If you switch from User Scene Two to User Scene One while using USB A Playback, the volume will change from 25% to Mute.