Difference between revisions of "Two T1® s with Two Model II Systems"
m (New page: <html> <style> table {border:1px; width:600px;} td {vertical-align:top} </style> </html> === Standard Setup with Two Model II Systems === If you have two systems made of one Model II w...) |
m |
||
Line 62: | Line 62: | ||
[[Multiple Source Interference]] - hollow or ringy sounding vocals, uneven distribution of the bass. | [[Multiple Source Interference]] - hollow or ringy sounding vocals, uneven distribution of the bass. | ||
− | [[T1 ToneMatch® Audio Engine Aux Output]] - not difficult to set up, but inconvenient to manage during a live show. | + | [[T1 ToneMatch® Audio Engine / Aux|T1 Aux Output]] - not difficult to set up, but inconvenient to manage during a live show. |
− | [[No Reverb on Aux]] - the Aux output does NOT include Reverb effect. | + | [[T1_ToneMatch®_Audio_Engine_/_Aux#No_Reverb_on_Aux|No Reverb on Aux]] - the Aux output does NOT include Reverb effect. |
</td> | </td> | ||
Line 80: | Line 80: | ||
<tr> | <tr> | ||
<td> | <td> | ||
+ | Allow better monitoring for performers so they can hear the performers on the other side of the stage. | ||
+ | |||
+ | Using Aux allows you to create a separate mix to be sent to the opposite side of the stage. | ||
+ | |||
+ | The Aux volume outputs from each channel can be controlled at the T1® | ||
+ | |||
</td><td> | </td><td> |
Revision as of 05:22, 15 March 2013
Contents
Standard Setup with Two Model II Systems
If you have two systems made of one Model II with T1® and a B1 or B2 bass module then set up like this.
Pro | Con |
---|---|
This is the ideal, the way the L1® System was designed to be used. This allows you to give each performer control over his/her own sound. The audience experiences the Cocktail Party Effect |
It may be a challenge to get enough distance between the microphones and the L1®s |
Shallow Stage Monitoring Issue
Pro | Con |
---|---|
Pushing the L1® out to the sides beside the performers allows more room for the performers on the stage. |
Performers at the edges of the stage may have trouble hearing people on the opposite side of the stage. |
Aux Output to Opposite Model II
If you MUST do this, then for best results there should be at least 20 feet (6 meters) between the L1®s.
Pro | Con |
---|---|
Allow better monitoring for performers so they can hear the performers on the other side of the stage. Using Aux allows you to create a separate mix to be sent to the opposite side of the stage. The Aux volume outputs from each channel can be controlled at the T1® |
Decreased gain before feedback (greater likelihood of feedback). More microphones per system, and each microphone is heard through two systems Multiple Source Interference - hollow or ringy sounding vocals, uneven distribution of the bass. T1 Aux Output - not difficult to set up, but inconvenient to manage during a live show. No Reverb on Aux - the Aux output does NOT include Reverb effect. |
Analog Master Output to Opposite Model II
If you MUST do this, then for best results there should be at least 20 feet (6 meters) between the L1®s.
Pro | Con |
---|---|
Allow better monitoring for performers so they can hear the performers on the other side of the stage. Using Aux allows you to create a separate mix to be sent to the opposite side of the stage. The Aux volume outputs from each channel can be controlled at the T1®
|
Decreased gain before feedback (greater likelihood of feedback). More microphones per system, and each microphone is heard through two systems Multiple Source Interference - hollow or ringy sounding vocals, uneven distribution of the bass. T1® Master Output is the same as the ToneMatch Port output - You will need to use the Model II Power Stand Analog Input Trim to control the volume across the stage. |