Difference between revisions of "L1 Pro Emergency Kit"
(Created page with "{{L1 Pro32 icon}}{{L1 Pro16 icon}}{{L1 Pro8 icon}} ---- Category:L1 Pro") |
m |
||
| Line 2: | Line 2: | ||
| + | |||
| + | {| class="wikitable" | ||
| + | |+ L1 Pro Emergency and Spares Kit | ||
| + | ! Item | ||
| + | ! Reason | ||
| + | |- | ||
| + | | IEC Power Cord | ||
| + | | They got lost, and this can be used with an XLR cable to substitute for a SubMatch Cable | ||
| + | |- | ||
| + | | XLR cable | ||
| + | | It's always good to have a spare. Use with an IEC Power Cord to replace a SubMatch Cable | ||
| + | |- | ||
| + | | 1/4-inch (6.3mm) Tip-Ring-Sleeve Cable | ||
| + | | Connect mixers or devices with balanced connections to the L1 Pro. | ||
| + | |- | ||
| + | | 1/4-inch (6.3mm) Tip-Sleeve Cable | ||
| + | | This is your basic instrument cable. It's always good to have a spare. | ||
| + | |- | ||
| + | | 1/8-inch (3.5 mm) Tip-Ring-Sleeve Cable | ||
| + | | Use this to connect the headphone output of a consumer device to L1 Pro channel 3 input | ||
| + | |- | ||
| + | | CAT5 cable | ||
| + | | Connect ToneMatch Mixers (T1/T4S/T8S) to the L1 Pro ToneMatch Port | ||
| + | |- | ||
| + | | Dynamic Microphone | ||
| + | | This is a spare; the one to use when you have guest speakers making announcements | ||
| + | |- | ||
| + | | Gaffers Tape | ||
| + | | Tie down cables, or quick repairs | ||
| + | |- | ||
| + | | Labels with contact information | ||
| + | | I have labels on all my gear, but it's good to have spares in case they fall off | ||
| + | |- | ||
| + | | ToneMatch Power Supply | ||
| + | | In case I need to run two ToneMatch Mixers to a single L1 Pro | ||
| + | |} | ||
Revision as of 19:29, 21 February 2026
Template:L1 Pro32 iconTemplate:L1 Pro16 iconTemplate:L1 Pro8 icon
| Item | Reason |
|---|---|
| IEC Power Cord | They got lost, and this can be used with an XLR cable to substitute for a SubMatch Cable |
| XLR cable | It's always good to have a spare. Use with an IEC Power Cord to replace a SubMatch Cable |
| 1/4-inch (6.3mm) Tip-Ring-Sleeve Cable | Connect mixers or devices with balanced connections to the L1 Pro. |
| 1/4-inch (6.3mm) Tip-Sleeve Cable | This is your basic instrument cable. It's always good to have a spare. |
| 1/8-inch (3.5 mm) Tip-Ring-Sleeve Cable | Use this to connect the headphone output of a consumer device to L1 Pro channel 3 input |
| CAT5 cable | Connect ToneMatch Mixers (T1/T4S/T8S) to the L1 Pro ToneMatch Port |
| Dynamic Microphone | This is a spare; the one to use when you have guest speakers making announcements |
| Gaffers Tape | Tie down cables, or quick repairs |
| Labels with contact information | I have labels on all my gear, but it's good to have spares in case they fall off |
| ToneMatch Power Supply | In case I need to run two ToneMatch Mixers to a single L1 Pro |