Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"
(® replaces ™ and image or Model II inputs) |
|||
Line 1: | Line 1: | ||
The {{Model II}} can accept two inputs. | The {{Model II}} can accept two inputs. | ||
− | + | [[Image:ModelIIInputs.gif|right|Model II inputs]] | |
=== ToneMatch™ Connection === | === ToneMatch™ Connection === | ||
− | The | + | The ToneMatch® connection is specifically designed for a {{T1}}. |
− | The | + | The ToneMatch® cable is supplied with the {{T1}} and uses a male Ethercon connector at both ends. |
=== Analog Connection === | === Analog Connection === | ||
− | The Analog connection is a ¼ inch phone jack. You can use this for a the second | + | The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack). |
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors. | This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors. | ||
− | Note: A | + | Note: A T1® connected to the the Analog input will require the optional {{T1}} power supply. See the {{Bose Accessories Page}} for details. |
Revision as of 23:22, 8 April 2008
The L1 Model II can accept two inputs.
ToneMatch™ Connection
The ToneMatch® connection is specifically designed for a T1 ToneMatch Audio Engine. The ToneMatch® cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.
Analog Connection
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.
Note: A T1® connected to the the Analog input will require the optional T1 ToneMatch Audio Engine power supply. See the Bose® Accessories Page for details.