Difference between revisions of "L1® Compact / Connection from a Mixer"
m (→Cables) |
m (ST moved page L1® Compact / Connection from a Mixer to L1® Compact / Connection from a Mixer) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | Summary | + | ===Summary=== |
+ | You can run a stereo source to the 1/8 input or the RCA jack inputs. | ||
− | You can used ¼ inch jack cables. Balanced or unbalanced will work fine | + | If you have a mixer with a ¼ jack output that can be switched to mono this should work well. You can used ¼ inch jack cables. Balanced or unbalanced will work fine. |
+ | ==== Stereo Sources ==== | ||
+ | If you have a stereo source use the 1/8 inch stereo connection or the RCA jack inputs. Examples of stereo sources: | ||
+ | * iPod or other personal stereo device | ||
+ | * Portable CD player | ||
+ | * Home stereo CD or Video deck | ||
+ | * Some DJ mixers use RCA Jack outputs | ||
+ | |||
+ | '''DO NOT use a stereo ¼ inch jack Tip-Ring-Sleeve connection'''. You may suffer significant signal loss. If you use a stereo source then use the 1/8 inch stereo connection or the RCA jack inputs. | ||
+ | |||
+ | |||
+ | ==== Mixers ==== | ||
+ | |||
+ | You need a mono output from the mixer to {{Compact}} Channel 2 ¼ inch jack | ||
=== ¼ inch jack Cables === | === ¼ inch jack Cables === | ||
+ | You can use TS (Tip Sleeve) unbalanced cables, OR TRS (Tip Ring Sleeve) balanced cables. If the cable uses ¼ inch jack plugs and the ends are the same, then the cable should be fine. | ||
+ | NOTE: '''DO NOT use a stereo''' ¼ inch jack Tip-Ring-Sleeve connection. You may suffer significant signal loss. If you must make a stereo connection then use the 1/8 inch stereo connection or the RCA jack inputs. | ||
{{#lst:T1 ToneMatch® Audio Engine / 1/4 inch Output Connections to L1® Family Members|Balanced}} | {{#lst:T1 ToneMatch® Audio Engine / 1/4 inch Output Connections to L1® Family Members|Balanced}} |
Latest revision as of 06:42, 26 March 2017
Contents
Summary
You can run a stereo source to the 1/8 input or the RCA jack inputs.
If you have a mixer with a ¼ jack output that can be switched to mono this should work well. You can used ¼ inch jack cables. Balanced or unbalanced will work fine.
Stereo Sources
If you have a stereo source use the 1/8 inch stereo connection or the RCA jack inputs. Examples of stereo sources:
- iPod or other personal stereo device
- Portable CD player
- Home stereo CD or Video deck
- Some DJ mixers use RCA Jack outputs
DO NOT use a stereo ¼ inch jack Tip-Ring-Sleeve connection. You may suffer significant signal loss. If you use a stereo source then use the 1/8 inch stereo connection or the RCA jack inputs.
Mixers
You need a mono output from the mixer to L1 Compact Channel 2 ¼ inch jack
¼ inch jack Cables
You can use TS (Tip Sleeve) unbalanced cables, OR TRS (Tip Ring Sleeve) balanced cables. If the cable uses ¼ inch jack plugs and the ends are the same, then the cable should be fine.
NOTE: DO NOT use a stereo ¼ inch jack Tip-Ring-Sleeve connection. You may suffer significant signal loss. If you must make a stereo connection then use the 1/8 inch stereo connection or the RCA jack inputs.
¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)
A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection.
¼ Inch Tip-Ring-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)
This should work fine but a balanced connection (immediately above) is preferred especially if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss.
Channel 2 Connection from T1 ToneMatch Audio Engine Details