Difference between revisions of "Template:S1 Pro+ with Sub1 or Sub2"
(Created page with "{{T4S icon}}{{T8S icon}}{{S1 Pro+ icon}}{{Sub icon}} === Using Inputs on S1 Pro+ === You can use the {{S1 Pro+}} as the sound source (e.g., microphone and guitar and backing t...") |
m |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{T4S icon}}{{T8S icon}}{{S1 Pro+ icon}}{{Sub icon}} | + | <!--{{T4S icon}}{{T8S icon}}{{S1 Pro+ icon}}{{Sub icon}}--> |
=== Using Inputs on S1 Pro+ === | === Using Inputs on S1 Pro+ === | ||
| − | You can use the {{S1 Pro+}} as the sound source (e.g., microphone and guitar and backing tracks via Bluetooth) | + | You can use the {{S1 Pro+}} as the sound source (e.g., microphone and guitar and backing tracks via Bluetooth). This is different from the {{S1 Pro}} where the preferred method was to route all sound sources to the Sub1/Sub2 first and from the Sub1/Sub2 to the {{S1 Pro}}. This is because the {{S1 Pro}} did not have the Sub EQ mode. |
| + | |||
| + | |||
| + | Engage the {{S1 Pro+}} Sub EQ and use the {{S1 Pro+}} Line Out to send a full range signal to the Sub1/Sub2. | ||
;Note these settings on the {{S1 Pro+}} | ;Note these settings on the {{S1 Pro+}} | ||
| Line 12: | Line 15: | ||
Note the following: | Note the following: | ||
# On the {{S1 Pro+}} turn on the Sub EQ setting. This sets the internal high pass filter to approximately 150 Hz. | # On the {{S1 Pro+}} turn on the Sub EQ setting. This sets the internal high pass filter to approximately 150 Hz. | ||
| − | #* With the Sub EQ turned on, the {{S1 Pro+}} will produce frequencies above 150 Hz and you will be able to push {{S1 Pro+}} harder (louder) | + | #* The Sub EQ setting does not affect the {{S1 Pro+}} Line Out. The Line Out remains full-range |
| − | #* Without the Sub EQ turned on, the {{S1 Pro+}} will sound the same as without the subwoofer | + | #* With the Sub EQ turned on, the {{S1 Pro+}} will produce frequencies above 150 Hz and you will be able to push {{S1 Pro+}} harder (louder) without low-end distortion |
| + | #* Without the Sub EQ turned on, the {{S1 Pro+}} will sound the same as without the subwoofer | ||
# The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz | # The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz | ||
Latest revision as of 11:30, 31 July 2024
Using Inputs on S1 Pro+
You can use the S1 Pro+ as the sound source (e.g., microphone and guitar and backing tracks via Bluetooth). This is different from the S1 Pro system where the preferred method was to route all sound sources to the Sub1/Sub2 first and from the Sub1/Sub2 to the S1 Pro system. This is because the S1 Pro system did not have the Sub EQ mode.
Engage the S1 Pro+ Sub EQ and use the S1 Pro+ Line Out to send a full range signal to the Sub1/Sub2.
- Note these settings on the S1 Pro+
- 👉 Turn on the Sub EQ (see the excerpt from the manual below)
- Note these settings on the Sub1 or Sub2
- 👉 Set LINE IN EQ to L1
- 👉 Set LINE OUT EQ to S1 (Press and hold LINE OUT EQ button for 4 seconds)
Note the following:
- On the S1 Pro+ turn on the Sub EQ setting. This sets the internal high pass filter to approximately 150 Hz.
- The Sub EQ setting does not affect the S1 Pro+ Line Out. The Line Out remains full-range
- With the Sub EQ turned on, the S1 Pro+ will produce frequencies above 150 Hz and you will be able to push S1 Pro+ harder (louder) without low-end distortion
- Without the Sub EQ turned on, the S1 Pro+ will sound the same as without the subwoofer
- The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
Connection with a Mixer (optional)
Connections with Sub1 or Sub2 and the S1 Pro system
Using a mixer, the signal flow goes from
- The signal source (e.g., ToneMatch Mixer[1], mixer, DJ console) output to
- The Sub1 or Sub2 subwoofer LINE IN 1 to
- The Sub1 or Sub2 subwoofer LINE OUT 1 to
- The S1 Pro+ channel 3 Aux with level 10 o'clock.
- Note these settings on the Sub1 or Sub2
- 👉 Set LINE IN EQ to L1
- 👉 Set LINE OUT EQ to S1 (Press and hold LINE OUT EQ button for 4 seconds)
Set up this way,
- The Sub1 or Sub2 handles frequencies from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
- The S1 Pro system handles frequencies above 150 Hz