Difference between revisions of "Sound Drop Outs at High Volume"
m |
m |
||
| Line 10: | Line 10: | ||
So we looked at capacitance per foot with different wire guages, and with twisted vs untwisted pairs in the same cable, and looked at our sensing algorithm, and did two things to solve the problem: | So we looked at capacitance per foot with different wire guages, and with twisted vs untwisted pairs in the same cable, and looked at our sensing algorithm, and did two things to solve the problem: | ||
| − | We had Mark at [http://www.audiopile.net/ Audiopile.net] send us some samples to our new spec, we checked them, and they worked well. This gave a method for our customers who needed a long B1 cable to get [http://www.audiopile.net/products/Speaker_Cables/NL-4_speaker_cable/ | + | We had Mark at [http://www.audiopile.net/ Audiopile.net] send us some samples to our new spec, we checked them, and they worked well. This gave a method for our customers who needed a long B1 cable to get [http://www.audiopile.net/products/Speaker_Cables/NL-4_speaker_cable/NL413_dropdown_cutsheet_2.shtml one that worked]. |
The second thing we did was redesign the {{L1}} software so that it could "filter out" the effects of momentary crosstalk and not cause the problem. That way future L1's would not have the issue. | The second thing we did was redesign the {{L1}} software so that it could "filter out" the effects of momentary crosstalk and not cause the problem. That way future L1's would not have the issue. | ||
Revision as of 15:40, 4 September 2013
Sound Drop Outs at High Volume
From Bill-at-Bose[1]
Hilmar[2] and I looked into sound dropouts further to find the root cause, and found the rather subtle issue that, depending on the wire gauges and how the wires were paired in the cable, loud bass signals (in the speaker pair of wires) in extra long cables could capacitively couple into the sensing pair of wires. When it happened, the L1 "thought" you were changing your B1 Bass Module configuration and would mute.
So we looked at capacitance per foot with different wire guages, and with twisted vs untwisted pairs in the same cable, and looked at our sensing algorithm, and did two things to solve the problem:
We had Mark at Audiopile.net send us some samples to our new spec, we checked them, and they worked well. This gave a method for our customers who needed a long B1 cable to get one that worked.
The second thing we did was redesign the L1 software so that it could "filter out" the effects of momentary crosstalk and not cause the problem. That way future L1's would not have the issue.
- ↑ Bill-at-Bose talks about volume dropouts
- ↑ Hilmar-at-Bose