Difference between revisions of "Template:Balanced Unbalanced 1/4"
m (formatting) |
m (formatting) |
||
| Line 1: | Line 1: | ||
| − | + | <h4> ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced) </h4> | |
A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection. | A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection. | ||
| Line 6: | Line 6: | ||
| − | + | <h4> ¼ Inch Tip-Ring-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced) </h4> | |
This should work fine but a balanced connection (immediately above) is preferred especially if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss. | This should work fine but a balanced connection (immediately above) is preferred especially if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss. | ||
Latest revision as of 20:36, 19 June 2018
¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)
A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection.
¼ Inch Tip-Ring-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)
This should work fine but a balanced connection (immediately above) is preferred especially if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss.
