Difference between revisions of "Crossover with Line Out"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(created article)
 
m (link to Crossover)
Line 1: Line 1:
If you add a {{A1}} and {{B1}} or {{B2}} to an {{Compact}} or {{S1}} you will need a crossover between the Line Out and the {{A1}}.
+
If you add a {{A1}} and {{B1}} or {{B2}} to an {{Compact}} or {{S1}} you will need a [[Crossover|crossover]] between the Line Out and the {{A1}}.
  
 
The Line Out from the {{Compact}} and {{S1}} is full range. The {{B1}} and {{B2}} are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the {{Model 1S}} or {{Model II}} Power Stand.
 
The Line Out from the {{Compact}} and {{S1}} is full range. The {{B1}} and {{B2}} are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the {{Model 1S}} or {{Model II}} Power Stand.

Revision as of 00:46, 28 June 2018

If you add a PackLite® power amplifier model A1 and B1 Bass Module or B2 Bass Module to an L1 Compact or S1 Pro System you will need a crossover between the Line Out and the PackLite® power amplifier model A1.

The Line Out from the L1 Compact and S1 Pro System is full range. The B1 Bass Module and B2 Bass Module are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the L1 Model 1S or L1 Model II Power Stand.

Check out these discussions in our Community:

Compact with Packlite + B1

The Compact and the B2, via the A1 and the Rolls SX21