Difference between revisions of "T8S Aux Send Channel Inputs to Different Aux Outputs"
(created article) |
m (formatting) |
||
Line 1: | Line 1: | ||
− | ; How do I | + | ; How do I send each channel to a different Aux output or than one channel to more than one Aux output. |
+ | |||
+ | In this example, we will send: | ||
+ | *Channel 1 to Aux 1 | ||
+ | *Channel 2 to Aux 2 | ||
+ | *Channel 3 to Aux 3 | ||
+ | *Channel 4 to Aux 1 and Aux 2 | ||
+ | |||
+ | We will talk about how you route the signals here. To learn more about individual settings please see [[T8S Aux]]. | ||
Turn the Rotary Selector to PAN/AUX | Turn the Rotary Selector to PAN/AUX |
Revision as of 21:19, 4 August 2018
- How do I send each channel to a different Aux output or than one channel to more than one Aux output.
In this example, we will send:
- Channel 1 to Aux 1
- Channel 2 to Aux 2
- Channel 3 to Aux 3
- Channel 4 to Aux 1 and Aux 2
We will talk about how you route the signals here. To learn more about individual settings please see T8S Aux.
Turn the Rotary Selector to PAN/AUX
- Channel 1 to Aux 1
- Press Channel 1 CH EDIT
- Turn Menu knob (the left most button under the display) until
Aux Send 1 is highlighted. - Press the Menu knob
- Press the middle button to change from
Muted to Level 50% (you can fine tune this later) - Press the last button (right most button) and turn until you highlight
- Post: After Fader (you can choose Dry or Pre if you prefer)
- You're done with Channel 1 routed to Aux 1
- Channel 2 to Aux 2
- Press Channel 2 CH EDIT
- Turn Menu knob (the left most button under the display) until
Aux Send 1 is highlighted. - Press the Menu knob
- Press the middle button to change from
Muted to Level 50% (you can fine tune this later) - Press the last button (right most button) and turn until you highlight
- Post: After Fader (you can choose Dry or Pre if you prefer)
- You're done with Channel 2 routed to Aux 2
- Channel 3 to Aux 3
- Press Channel 3 CH EDIT
- Turn Menu knob (the left most button under the display) until
Aux Send 1 is highlighted. - Press the Menu knob
- Press the middle button to change from
Muted to Level 50% (you can fine tune this later) - Press the last button (right most button) and turn until you highlight
- Post: After Fader (you can choose Dry or Pre if you prefer)
- You're done with Channel 3 routed to Aux 3
- Channel 4 to Aux 1 and Aux 2
- Press Channel 4 CH EDIT
- Turn Menu knob (the left most button under the display) until
Aux Send 1 is highlighted. - Press the Menu knob
- Press the middle button to change from
Muted to Level 50% (you can fine tune this later) - Press the last button (right most button) and turn until you highlight
- Post: After Fader (you can choose Dry or Pre if you prefer)
- You're done with Channel 4 routed to Aux 1
- Turn Menu knob (the left most button under the display) until
Aux Send 2 is highlighted. - Press the menu knob
- Press the middle button to change from
Muted to Level 50% (you can fine tune this later) - Press the last button (right most button) and turn until you highlight
- Post: After Fader (you can choose Dry or Pre if you prefer)
- You're have sent Channel 4 routed to Aux 2 (as well as Aux 1)