Difference between revisions of "T4S to Two S1 Pro Systems (Stereo)"
(Created page with " Here's a quick overview of how you can connect a T4S to an S1 Pro *Leave the T4S and S1 Pro turned off until you have things connected *Connect the T4S power supply to the T...") |
m |
||
Line 16: | Line 16: | ||
</html> | </html> | ||
− | + | {{S1 Pro Mixer Settings}} | |
− | *On each {{S1} Pro channel | + | <!-- |
+ | *On each {{S1} Pro channel you are using: | ||
*Turn off the reverb | *Turn off the reverb | ||
*Set both tone controls to the center position (12:00 o'clock) | *Set both tone controls to the center position (12:00 o'clock) | ||
*Set the channel volume off | *Set the channel volume off | ||
*Set the ToneMatch switch to Off | *Set the ToneMatch switch to Off | ||
+ | --> | ||
;Turn on the T4S | ;Turn on the T4S | ||
− | |||
− | |||
− | |||
− | + | #Set the Rotary Selector to PAN/AUX | |
− | + | #Press the CH EDIT button for each channel you are using and pan the input left or right as required | |
− | + | ||
− | + | ||
− | + | ;Turn on the S1 Pro | |
− | + | #Play some music on the {T4S] and bring up the Master Volume to 12:00 o'clock | |
− | + | #Bring up the channel volume on the S1 Pros so you get a solid green light. If you see red or you hear distortion, turn down the channel volume. | |
+ | Now use the {{T4S}} Master Volume to control the overall volume. | ||
+ | <!-- | ||
If you have questions, please join the conversation in the [https://www.bosepro.community/g/portable/topic/connecting-t4s-tonematch-mixer-to-bose-s1-pro?reply=35372794827754454#35372794827754454 Bose Portable PA Community]. | If you have questions, please join the conversation in the [https://www.bosepro.community/g/portable/topic/connecting-t4s-tonematch-mixer-to-bose-s1-pro?reply=35372794827754454#35372794827754454 Bose Portable PA Community]. | ||
− | + | --> | |
---- | ---- | ||
[[Category:T4S]] | [[Category:T4S]] | ||
[[Category:S1 Pro]] | [[Category:S1 Pro]] |
Revision as of 02:42, 2 September 2018
Here's a quick overview of how you can connect a T4S to an S1 Pro
- Leave the T4S and S1 Pro turned off until you have things connected
- Connect the T4S power supply to the T4S (T4S power supply sold separately)
- Connect the T4S Right Output to the Right S1 Pro System channel 1 or 2
- Connect the T4S Left Output to the Left S1 Pro System channel 1 or 2
- Use 1/4 inch (6.35 mm) Tip-Ring-Sleeve cables for best results
On the S1 Pro System, for each channel you are connecting to the mixer use these settings while you are setting up.
- Reverb OFF
- Bass at 12:00 o'clock
- Treble at 12:00 o'clock
- ToneMatch switch OFF
You can adjust the Reverb, Bass, and Treble after you get your basic sound working.
Gain Staging
- Using a Bose device as the source
When connecting a ToneMatch Mixer[1] or an S1 Pro System Line Out to an S1 Pro System channel 1 or channel 2
Set the volume control to 10:00 o'clock with 1/4 inch (6.3 mm) Tip-Ring-Sleeve
- The signal strength from a ToneMatch Mixer[1] or an S1 Pro System Line Out is sufficient to achieve the maximum usable volume from the S1 Pro System
- Control the overall volume from the ToneMatch Mixer[1] or the first S1 Pro System. If you use an XLR cable, set the volume control to 9:00 o'clock
- Using a third-party source (not a Bose device as the source)
For each channel you are using on the S1 Pro System
- Turn the channel volume off
- Connect your sound source
- Adjust the volume of the source device output to the reference or nominal output level.
- On analog consoles this may be marked as unity or 0 dB.
- On digital consoles this may be marked as -18 dBFS[2][3]. The exact value (-18 dBFS to -20 dBFS) may vary depending your location[4].
- Refer to the manual for the source device for details.
- If the source device does not have metering or indicators, set the output as high as you can without hearing distortion or seeing red indicator lights.
- While playing/singing as loud as you will during your performance, bring up the channel volume until you see solid green on the channel indicator light. Occasional flickers of red are okay. If you see solid red or you hear distortion, turn down the volume.
- Turn on the T4S
- Set the Rotary Selector to PAN/AUX
- Press the CH EDIT button for each channel you are using and pan the input left or right as required
- Turn on the S1 Pro
- Play some music on the {T4S] and bring up the Master Volume to 12:00 o'clock
- Bring up the channel volume on the S1 Pros so you get a solid green light. If you see red or you hear distortion, turn down the channel volume.
Now use the T4S ToneMatch mixer Master Volume to control the overall volume.