Difference between revisions of "Molex Connections"

Latest revision as of 07:54, 26 March 2019

L1 Model II This information is applicable to the L1® Model II

L1 Model I This information is applicable to the L1 Model I

This document is NOT supported by Bose.

Molex connector pinouts for Classic / Model I / Model II

Connector in Power Stand

Connector in bottom of Cylindrical Radiator®

Please click the image to the right to see full sized version.

This applies to all three L1® Models (Classic / Model I / Model II). The internal wiring is different, but the connectors are wired exactly the same.

There is no support for this document

Revision as of 04:47, 2 April 2010 (view source) ST (talk \| contribs) m ← Older edit		Latest revision as of 07:54, 26 March 2019 (view source) ST (talk \| contribs) m
Line 18:		Line 18:
	This applies to all three L1® Models (Classic / Model I / Model II). The internal wiring is different, but the connectors are wired exactly the same.		This applies to all three L1® Models (Classic / Model I / Model II). The internal wiring is different, but the connectors are wired exactly the same.

−	<big>~~This~~ is no support for this document</big>	+	<big>There is no support for this document</big>