Difference between revisions of "S1 Pro System with B1 Bass Module"
m |
m |
||
Line 15: | Line 15: | ||
:The {{S1}} Line Out is full range. Using this to provide a full range signal the {{A1}} to power the {{B1}}. That's not optimal because you will have a frequency overlap between the {{S1}} and {{B1}}. The {{B1}} was not designed to operate as a full-range loudspeaker. | :The {{S1}} Line Out is full range. Using this to provide a full range signal the {{A1}} to power the {{B1}}. That's not optimal because you will have a frequency overlap between the {{S1}} and {{B1}}. The {{B1}} was not designed to operate as a full-range loudspeaker. | ||
:You would need a crossover network<ref>Crossover: An example is the [http://rolls.com/product/SX21 Rolls SX21]. This has been discussed many times in the {{Community|link=https://www.bosepro.community/g/portable/advancedSearch?searching=true&type=0-everything&searcher.optionalWords=&searcher.requiredWords=S1+Rolls+SX21&searcher.exactPhrase=&searcher.notWords=&searcher.tags=&memberFilterLabelSearch_ignore=&searcher.postedBetween.type=BETWEEN&searcher.postedBetween.after.dateString=&searcher.postedBetween.before.dateString=&searchPagination.sort=SCORE}} </ref> with a low-pass filter to send only frequencies below approximately 100 Hz to the {{B1}} but you might still need further processing with a parametric equalizer to make this combination work well together. | :You would need a crossover network<ref>Crossover: An example is the [http://rolls.com/product/SX21 Rolls SX21]. This has been discussed many times in the {{Community|link=https://www.bosepro.community/g/portable/advancedSearch?searching=true&type=0-everything&searcher.optionalWords=&searcher.requiredWords=S1+Rolls+SX21&searcher.exactPhrase=&searcher.notWords=&searcher.tags=&memberFilterLabelSearch_ignore=&searcher.postedBetween.type=BETWEEN&searcher.postedBetween.after.dateString=&searcher.postedBetween.before.dateString=&searchPagination.sort=SCORE}} </ref> with a low-pass filter to send only frequencies below approximately 100 Hz to the {{B1}} but you might still need further processing with a parametric equalizer to make this combination work well together. | ||
− | :If you need more bass than the S1 Pro system provides on its own, Bose recommends you use one of the larger | + | :If you need more bass than the S1 Pro system provides on its own, Bose recommends you use add a Bose Sub1 or Suub2 or get one of the larger [[L1 Pro|L1 Pro systems]]. |
Revision as of 15:43, 19 May 2022
- Question
- Can you use the B1 Bass Module with the S1 Pro System
- Answer
- The B1 bass module is only compatible with the full-size L1 Legacy systems (L1 Classic, L1 Model 1S, L1 Model II). The B1 bass module is powered by a dedicated amplifier that is built into the power stand of those L1 systems.
- The S1 Pro system is engineered to deliver great balanced sound without a separate bass module. It doesn't have an extra amplifier built-in for a B1.
- As a matter of interest, the B1 bass module has two 5.25 inch drivers. The S1 Pro has one 6 inch driver.
- Question
- Can I use the PackLite® power amplifier model A1 to power the B1 Bass Module?
- Answer
- The S1 Pro System Line Out is full range. Using this to provide a full range signal the PackLite® power amplifier model A1 to power the B1 Bass Module. That's not optimal because you will have a frequency overlap between the S1 Pro System and B1 Bass Module. The B1 Bass Module was not designed to operate as a full-range loudspeaker.
- You would need a crossover network[1] with a low-pass filter to send only frequencies below approximately 100 Hz to the B1 Bass Module but you might still need further processing with a parametric equalizer to make this combination work well together.
- If you need more bass than the S1 Pro system provides on its own, Bose recommends you use add a Bose Sub1 or Suub2 or get one of the larger L1 Pro systems.
- ↑ Crossover: An example is the Rolls SX21. This has been discussed many times in the Bose Portable L1 Group