Difference between revisions of "S1 Pro+ Daisy Chain"

Revision as of 10:39, 30 July 2024

Connect Two S1 Pro+ using a wired connection For a wireless connection see: S1 Pro+ Daisy Chain Wireless

To connect an S1 Pro+ to a second S1 Pro+ using the S1 Pro+ XLR Wireless transmitter.

S1 Pro+ 1: This is the master S1 Pro+ to which you have connected the sound sources that you want to be heard through both S1 Pro+ systems

S1 Pro+ 2: This is the remote S1 Pro+ to which you send the sound from S1 Pro 1

Turn down the volume on both S1 Pro+ systems
Connect the S1 Pro+ 1 Line Out (XLR connection) to S1 Pro+ 2 Channel 3 Aux Input

The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.

On S1 Pro+ 1, bring up the channel volumes to the desired levels
On S1 Pro+ 2, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ 1

@@ Line 26: / Line 26: @@
 * Turn down the volume on both S1 Pro+ systems
 * Connect the S1 Pro+ 1 Line Out (XLR connection) to S1 Pro+ 2 Channel 3 Aux Input
-<br>[[Template:XLR Female to 1/4 TRS]]
+<br>{{XLR Female to 1/4 TRS}}
 * On S1 Pro+ 1, bring up the channel volumes to the desired levels
 * On S1 Pro+ 2, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ 1