Difference between revisions of "Template:Sub2 with Sub1"
m |
m |
||
| Line 2: | Line 2: | ||
* Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) | * Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) | ||
* On the Sub2 set the Line Out EQ to HPF (High Pass Filter) | * On the Sub2 set the Line Out EQ to HPF (High Pass Filter) | ||
| − | * Connect the Sub2 Line Out to the Sub1 | + | * Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable. |
* Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs | * Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs | ||
* Polarity: Plus on both | * Polarity: Plus on both | ||
Revision as of 02:49, 2 November 2024
You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1
- Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
- On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
- Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
- Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
- Polarity: Plus on both