Difference between revisions of "Template:Sub2 with Sub1"
m |
m |
||
| Line 3: | Line 3: | ||
There are two options. Either is fine. Choose the one you prefer. | There are two options. Either is fine. Choose the one you prefer. | ||
| − | ;Option 1: Same | + | ;Option 1: Same crossover frequency applied to both Sub1 and Sub2 (200—37Hz) |
# Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable) | # Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable) | ||
# Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR | # Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR | ||
| Line 11: | Line 11: | ||
# Polarity: Plus on both | # Polarity: Plus on both | ||
| − | ; Option 2: | + | ; Option 2: Crossover frequencies: <br>Sub2: 100—37 Hz <br>Sub1: 200—100 Hz |
# Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) | # Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) | ||
# On the Sub2 set the Line Out EQ to HPF (High Pass Filter) | # On the Sub2 set the Line Out EQ to HPF (High Pass Filter) | ||
Revision as of 03:02, 2 November 2024
You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1
There are two options. Either is fine. Choose the one you prefer.
- Option 1
- Same crossover frequency applied to both Sub1 and Sub2 (200—37Hz)
- Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)
- Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR
- Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
- On the Sub2 set the Line Out EQ to Full (Full Range)
- Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
- Polarity: Plus on both
- Option 2
- Crossover frequencies:
Sub2: 100—37 Hz
Sub1: 200—100 Hz
- Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
- On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
- Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
- Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
- Polarity: Plus on both