Kemper Player with XSONIC Airstep

MIDI Connection

USB Wired Connection

Connecting the Airstep USB-C to the Kemper USB-B port works. If you don't have this cable, you can get it from XSONIC in their Airstep Cable Pack

Connecting the Airstep USB-C to the Kemper USB-A does not work. The Kemper freezes.

Bluetooth MIDI Connection

This works to connect to the Kemper Profile Player USB-A port.

M-VAVE Wireless MIDI Transmission System Ultra Low Latency, USB Bluetooth Option for MIDI Controller Mac, iOS, Windows, 5-PIN DIN Interface Wireless MIDI Keyboard Instrument

The XSONIC Airstep finds the M-VAVE USB-A automatically.

I've read that the WIDI Bud Pro works but I have not tried it.

Rig Buttons

These settings will emulate the behaviour of the Kemper Remote or Kemper Stage.

Switch A

Field	Value
Name	Rig/Slot 1
Toggle Mode	Off
LED Display	Normal Mode

Message 1

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	50
CC Value	1

Message 2

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	50
CC Value	0

Switch B

Field	Value
Name	Rig/Slot 2
Toggle Mode	Off
LED Display	Normal Mode

Message 1

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	51
CC Value	1

Message 2

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	51
CC Value	0

Switch C

Field	Value
Name	Rig/Slot 3
Toggle Mode	Off
LED Display	Normal Mode

Message 1

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	52
CC Value	1

Message 2

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	52
CC Value	0

Switch D

Field	Value
Name	Rig/Slot 4
Toggle Mode	Off
LED Display	Normal Mode

Message 1

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	53
CC Value	1

Message 2

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	53
CC Value	0

Switch E

Field	Value
Name	Rig/Slot 5
Toggle Mode	Off
LED Display	Normal Mode

Message 1

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	54
CC Value	1

Message 2

Field	Value
Trigger	Release
Message Type	MIDI
Output Interface	ALL
MIDI Type	Control Change
MIDI Channel	1
CC Number	54
CC Value	0

Summary of Kemper MIDI Logic (Slots + Morph)

• CC#50–54: Load Slots 1–5 in Performance Mode or Rigs 1–5 in Browser Mode.
• Morph Triggering: If the same CC is sent again (with value 1–127), Morph is engaged.
• Morph Release: Sending value 0 disengages Morph.
• Momentary vs Latching: Controlled by the Rig’s internal “Momentary” setting.

Why Your Airstep Setup Works

• Press = CC#50–54 value 1 → Loads Rig or Slot
• Release = CC#50–54 value 0 → Ends Morph (if Momentary is enabled)
• Repeated Presses → Toggle Morph (if Momentary is disabled)
• Single Button Logic → Matches Kemper Stage/Remote behavior exactly

Kemper MIDI Documentation

If Rig Button Morph is activated in System Settings, and the PROFILER receives subsequent control changes #50-#54 following the initial Slot load, these will trigger Morphing.

So, the same button could be used to first load a Rig, and then act as a Morph Button for that Rig. To support all functions, values 1-127 should be sent when the button is hit, and value 0 should follow when the button is released. The setting of the “Momentary” option in Rig Settings determines whether the Morphing latches the morph sound and base sound, or if it immediately returns to the base sound as soon as you release the button.

Effects Stomps

Airstep Bank 2 – Stomp Mode Control (Kemper Profile Player)

When I use both the Airstep and the Airstep Lite, I use the Airstep for Rig buttons (above) and the Airstep Lite for Effects Buttons (below)

CC# 75-78 to map to Effects buttons 1-4, and the last button set to Tuner on/off. I did this instead of using CC# 17-22, which map to Modules A-D, because sometimes I use the Kemper Profile Player without the Airstep, and I wanted to use the Kemper Player mapping instead of the Profiler mappings. If I change the Effects buttons 1-4 on the Player, I wanted the Airstep to match.

Message	Effect Button 1	Effect Button 2	Effect Button 3	Effect Button 4	Stomp (e.g. Tuner)
Toggle Mode	On	On	On	On	On
LED Display	Toggle Mode	Toggle Mode	Toggle Mode	Toggle Mode	Toggle Mode
Message 1:	Trigger: Press Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 75 CC Value: 127	Trigger: Press Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 76 CC Value: 127	Trigger: Press Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 77 CC Value: 127	Trigger: Press Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 78 CC Value: 127	Trigger: Press Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 31 CC Value: 127
Message 2:	Trigger: — (No release message configured)	Trigger: Release Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 76 CC Value: 0	Trigger: Release Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 77 CC Value: 0	Trigger: Release Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 78 CC Value: 0	Trigger: Release Message Type: MIDI Output Interface: ALL MIDI Type: Control Change MIDI Channel: 1 CC Number: 31 CC Value: 0

Notes

• Toggle Mode On lets the Airstep track internal switch state, so LEDs reflect effect status (assuming Kemper doesn’t override).
• CC#75–79 are fully valid and can be assigned to any effect slot in Kemper’s MIDI settings.
• You can remap these CCs in Kemper’s System Settings to match your preferred stomp layout.

Airstep Configuration – Kemper Profiler Player Looper Control

Use the Airstep Preset for KPA Looper. It works, mimicking the Profiler Foot Controller and the Kemper Stage. For each function (e.g. Rec/Play/Overdub), there is a table with five rows. Each row represents an Airstep "Message". All the values are the same except for the second row in each table (88,89,90,91,92,93)

What follows is the documentation in case you want to reassign the buttons. In my case, I never use "Reverse" so I replaced it with "Undo".

Rec/Play/Overdub

• Switch Name: Rec/Play/Overdub
• Toggle Mode: Off
• LED Display: Normal Mode

Message	Trigger	CC#	Value	Description
1	Press	99	125	NRPN MSB (Looper)
2	Press	98	88	NRPN LSB (Rec/Play/Overdub)
3	Press	6	0	Data Entry MSB
4	Press	38	1	Data Entry LSB (Execute)
5	Release	38	0	Data Entry LSB (Reset)

Stop/Erase

• Switch Name: Stop/Erase
• Toggle Mode: Off
• LED Display: Normal Mode

Message	Trigger	CC#	Value	Description
1	Press	99	125	NRPN MSB (Looper)
2	Press	98	89	NRPN LSB (Stop/Erase)
3	Press	6	0	Data Entry MSB
4	Press	38	1	Data Entry LSB (Execute)
5	Release	38	0	Data Entry LSB (Reset)

Trigger

• Switch Name: Trigger
• Toggle Mode: Off
• LED Display: Normal Mode

Message	Trigger	CC#	Value	Description
1	Press	99	125	NRPN MSB (Looper)
2	Press	98	90	NRPN LSB (Trigger)
3	Press	6	0	Data Entry MSB
4	Press	38	1	Data Entry LSB (Execute)
5	Release	38	0	Data Entry LSB (Reset)

Reverse

• Switch Name: Reverse
• Toggle Mode: Off
• LED Display: Normal Mode

Message	Trigger	CC#	Value	Description
1	Press	99	125	NRPN MSB (Looper)
2	Press	98	91	NRPN LSB (Reverse)
3	Press	6	0	Data Entry MSB
4	Press	38	1	Data Entry LSB (Execute)
5	Release	38	0	Data Entry LSB (Reset)

Half Speed

• Switch Name: Half Speed
• Toggle Mode: Off
• LED Display: Normal Mode

Message	Trigger	CC#	Value	Description
1	Press	99	125	NRPN MSB (Looper)
2	Press	98	92	NRPN LSB (Half Speed)
3	Press	6	0	Data Entry MSB
4	Press	38	1	Data Entry LSB (Execute)
5	Release	38	0	Data Entry LSB (Reset)

Undo

• Switch Name: Undo
• Toggle Mode: Off
• LED Display: Normal Mode

Message	Trigger	CC#	Value	Description
1	Press	99	125	NRPN MSB (Looper)
2	Press	98	93	NRPN LSB (Undo)
3	Press	6	0	Data Entry MSB
4	Press	38	1	Data Entry LSB (Execute)
5	Release	38	0	Data Entry LSB (Reset)

---