S1 Pro+ Daisy Chain

S1 Pro+ Daisy Chain

Connect Two S1 Pro+ using a wired connection

For a wireless connection see: S1 Pro+ Daisy Chain Wireless

To connect an S1 Pro+ to a second S1 Pro+ using the S1 Pro+ XLR Wireless transmitter.

Terms used

S1 Pro+ 1

This is the master S1 Pro+ to which you have connected the sound sources that you want to be heard through both S1 Pro+ systems

S1 Pro+ 2

This is the remote S1 Pro+ to which you send the sound from S1 Pro 1

Set Up

1. Turn down the volume on both S1 Pro+ systems
2. Connect the S1 Pro+ 1 Line Out (XLR connection) to S1 Pro+ 2 Channel 3 Aux Input

The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.

Female XLR to 1/4" Male TRS Balanced Adaptor Cable (audiopile.net) or use an XLR cable with a converter

]]

1. On S1 Pro+ 1, bring up the channel volumes to the desired levels
2. On S1 Pro+ 2, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+ 1

---