From Bose Portable PA Encyclopedia
Emergency and Spares Kit for L1 Pro and S1 Pro(+)
| Item
|
Reason
|
| IEC Power Cord
|
They got lost, and this can be used with an XLR cable to substitute for a SubMatch Cable
|
| XLR cable
|
It's always good to have a spare. Use with an IEC Power Cord to replace a SubMatch Cable
|
| 1/4-inch (6.3mm) Tip-Ring-Sleeve Cable
|
Connect mixers or devices with balanced connections to the L1 Pro.
|
| 1/4-inch (6.3mm) Tip-Sleeve Cable
|
This is your basic instrument cable. It's always good to have a spare.
|
| 1/8-inch (3.5 mm) Tip-Ring-Sleeve Cable
|
Use this to connect the headphone output of a consumer device to L1 Pro or S1 Pro(+) channel 3 input
|
| CAT5 cable
|
Connect ToneMatch Mixers (T1/T4S/T8S) to the L1 Pro ToneMatch Port
|
| Dynamic Microphone
|
This is a spare; the one to use when you have guest speakers making announcements
|
| Gaffers Tape
|
Tie down cables, or quick repairs
|
| Labels with contact information
|
I have labels on all my gear, but it's good to have spares in case they fall off
|
| ToneMatch Power Supply
|
In case I need to run two ToneMatch Mixers to a single L1 Pro
|