Crossover with Line Out

From Bose Portable PA Encyclopedia
Revision as of 01:02, 20 March 2019 by ST (talk | contribs)
Jump to: navigation, search

B2 Bass ModuleThis information is applicable to the B2 Bass Module
B1 Bass ModuleThis information is applicable to the B1 Bass Module
A1 PackLite AmpThis information is applicable to the PackLite® A1 Power Amplifier
L1 Compact
S1 Pro  This information is applicable to the S1 Pro system

Can I add a Bose bass module like a B1 Bass Module or B2 Bass Module to an L1 Compact or S1 Pro System
The Line Out from the L1 Compact and S1 Pro System is full range. The B1 Bass Module and B2 Bass Module are designed to work with a signal from 40 Hz to 200 Hz, and preferably with an EQ curve set in the L1 Model 1S or L1 Model II Power Stand.

If you add a PackLite® power amplifier model A1 and B1 Bass Module or B2 Bass Module to an L1 Compact or S1 Pro System you will need a crossover between the Line Out and the PackLite® power amplifier model A1.

Check out these discussions in the community.

Compact with Packlite + B1

The Compact and the B2, via the A1 and the Rolls SX21