S1 Pro Pole Cup Switch

From Bose Portable PA Encyclopedia
Revision as of 20:28, 3 April 2021 by ST (talk | contribs) (Created page with "The S1 Pro uses an accelerometer to determine if it is in the tilt-back, horizontal or vertical position. It also has a switch inside the pole cup to determine if it is mounte...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The S1 Pro uses an accelerometer to determine if it is in the tilt-back, horizontal or vertical position. It also has a switch inside the pole cup to determine if it is mounted on a speaker stand. Based on the orientation and the switch, the S1 Pro automatically applies the correct EQ. If you depress the switch the speaker stand EQ is applied regardless of the orientation of the S1 Pro.

Here's a picture of the switch inside the pole cup. S1 Pole Cup 2.png

Warning - Do NOT use Speaker Stands Like This

Ultimate Support TS30.png

Bose recommends using speaker stands that have solid, smooth surfaces. Do not use stands like the one shown below. It will damage the switch in the pole cup.

Warning - Do NOT use speaker pole adapters

Bose recommends that you do NOT use speaker stand adapters like the Hercules SS100B. You could damage switch in the pole cup.

Hercules SS100B Adapter.jpg

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=S1_Pro_Pole_Cup_Switch&oldid=22209"