S1 Pro+ Live Stream Mode

S1 Pro+  

Live Stream Mode settings

Live Stream mode allows the system to be recognized as an audio interface when you connect it to your computer using a USB-C® cable. This lets you perform live for an online audience or record audio directly to your computer’s digital audio workstation (DAW).

Using Live Stream Mode

About Live Stream mode

When Live Stream mode is enabled, the system passes a dual mono mix of Channels 1, 2, and 3 to a connected computer. In this mode, the channel volume controls behave like faders on a mixer. Adjusting channel volume using either the channel controls or the Bose app adjusts the level of that channel within the mix being sent to your computer. A monitor volume control also appears on Channel 3, allowing you to adjust the master volume of the system speakers without affecting the computer mix. Once you enable Live Stream mode, it stays enabled until you disable it or the system powers off.
NOTE: During Live Stream mode, the system can send audio to your computer, but it can’t receive it. USB playback is not supported.

Enable/Disable Live Stream mode

1. Press and hold the channel control for Channel 3 until the additional controls menu appears on the channel display.
2. . Rotate the channel control to highlight "Live Stream," then press to select it.
3. Rotate the channel control to highlight your preferred setting, then press to select it:
   • On: Enables Live Stream mode, allowing the system to be recognized as an audio interface when connected to your computer
   • Off (default): Disables Live Stream mode, preventing the system from being recognized as an audio interface when connected to your computer
4. Press and hold the channel control until the additional controls menu disappears.

Connect the system to your computer

1. Connect one end of a USB-C cable (not provided) to the USB-C port on the system.
2. Connect the other end to your computer.
   

Adjusting the monitor volume in Live Stream mode

When Live Stream mode is enabled, you can use the channel control for Channel 3 to adjust the master volume of the system speakers without affecting the mix being sent to your computer. NOTE: The monitor volume control isn’t available in the Bose app .

1. Press and release the channel control for Channel 3 until "MONITOR VOLUME" appears on the channel display.
2. Rotate the channel control to adjust the monitor volume.
   NOTE: After 10 seconds of inactivity, the channel display resets to "VOLUME."

Source: Bose S1 Pro+ Support

---