T1 ToneMatch® Audio Engine / Click Track with In Ear Monitors
Question: How do I run a Click Track through a T1 ToneMatch Audio Engine?
Answer: You can send the click to any channel on the T1 ToneMatch® Audio Engine, leaving it's volume fader (to master output) OFF.
Plug the in-ears into the Aux out on the T1 ToneMatch® Audio Engine. Select Aux on the T1 ToneMatch® Audio Engine's rotary dial, press the channel edit button for the Click's channel. Select Prefader on the Aux output, and adjust the volume e until you hear the click.
To monitor the other channels on the T1 ToneMatch® Audio Engine, follow the same procedure with each channel, sending it's signal to the Aux output.
The nice thing is that the Aux out will send a signal to both ears of your in-ears, if you need to use both.
Source: Drumr Pete - How do I use a Click Track with In Ear Monitors