Bose SoundLink Wireless Link adapter to T1

Connecting the Bose SoundLink Wireless Link adapter to a T1®.

Connect the Bose SoundLink Wireless Link adapter Audio Out to T1® Channel 4/5.

Set the T1® Channel 4/5 Input trim so you see solid green with occasional flickers of yellow - but no red. If you see flickers of red (below), turn the Trim down. You are definitely nearing or in compression. Turn the Trim down until there are no red flickers.

Here's the big picture adapted from page 13 of the Bose SoundLink Wireless Link adapter owners guide.

You can use the Aux cable and Splitter that came with your SoundLink Wireless Link adapter.  You will also need two adapters like this.

You will connect to T1® Channel 4/5 here:

Or you can use any combination of cables and adapters that gives you connections like this.

Here's and example: Hosa CMP-159 3.5 mm TRS to Dual 1/4 inch TS Stereo Breakout Cable

 

If you have questions, please join the conversation in the Bose Pro Portable PA Community

---