PS1 Powerstand Connections/Line Out/XLR

Line Outs (XLR balanced) for Channels 1 and 2

For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). This is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to daisy-chain PS1 Power Stand (Classic) / Model Is use a pad between the Systems. You would probably put the pad at the input of the second PS1 Power Stand (Classic) / Model I. Note the position of the pad in the diagram below.