Difference between revisions of "Effects/Lexicon/MX200"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m (=== Controlling the Wet/Dry Mix ===)
Line 30: Line 30:
  
 
=== Controlling the Wet/Dry Mix ===
 
=== Controlling the Wet/Dry Mix ===
Using the terminology from page 7 of the [http://www.lexiconpro.com/Product_Downloads/MX200Manual_B.pdf Lexicon MX200 Users Manual] you are making a '''Serial'''. This mean that you will control the wet/dry mix using the mix controls (11 and 12) on the front panel.
+
Using the terminology from page 7 of the [http://www.lexiconpro.com/Product_Downloads/MX200Manual_B.pdf Lexicon MX200 Users Manual] you are making a '''Serial''' connection. This mean that you will control the wet/dry mix using the mix controls (11 and 12) on the front panel. The Lexicon manual suggests that you may want to use a parallel connection for reverb, (and you can do this with the {{PS1}} you will have to use Channel 3 or 4 for the return signal. There is not great advantage to this as you will still have to control the amount of effect (reverb) being sent to the {{PS1} from the effects unit. It is probably simpler to use the serial method and the mix controls on the Lexicon unit to manage how much reverb is applied to the signal.  
  
 
[[Image:LexiconMX200Mix.gif]]
 
[[Image:LexiconMX200Mix.gif]]
 
 
  
 
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/5841038914?r=5841038914#5841038914 Original post in the Bose® Musicians Community Message Boards]  
 
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/5841038914?r=5841038914#5841038914 Original post in the Bose® Musicians Community Message Boards]  

Revision as of 22:00, 25 December 2006

Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

effectsSerial%5B1%5D.gif

Insert Cable

Photo

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable

Insert Cable Connections to the PS1 Power Stand (Classic) / Model I

Insert Cable Connections.png


Lexicon MX200 Specific Notes

Links

With the Lexicon MX200 you can use two channels when you operate independently. These illustrations are based on using both channels to support two PS1 Power Stand (Classic) / Model Is.

Connections at the Lexicon MX200

LexiconMX200Connect.png

Routing with Two PS1 Power Stand (Classic) / Model Is

Front Panel

LexiconMX200Routing01.gif

Documentation (Page 12 of the manual)

LexiconMX200RoutingDualMono.gif


Controlling the Wet/Dry Mix

Using the terminology from page 7 of the Lexicon MX200 Users Manual you are making a Serial connection. This mean that you will control the wet/dry mix using the mix controls (11 and 12) on the front panel. The Lexicon manual suggests that you may want to use a parallel connection for reverb, (and you can do this with the PS1 Power Stand (Classic) / Model I you will have to use Channel 3 or 4 for the return signal. There is not great advantage to this as you will still have to control the amount of effect (reverb) being sent to the {{PS1} from the effects unit. It is probably simpler to use the serial method and the mix controls on the Lexicon unit to manage how much reverb is applied to the signal.

LexiconMX200Mix.gif

There is more discussion in the Original post in the Bose® Musicians Community Message Boards