Difference between revisions of "L1 Pro32 Separating the Sections of the Mid-High Array"
m |
m |
||
Line 5: | Line 5: | ||
# Wear rubberized work gloves so you can get a good grip on the sections. | # Wear rubberized work gloves so you can get a good grip on the sections. | ||
# Firmly grasp the sections about 12" above and 3" below the break. | # Firmly grasp the sections about 12" above and 3" below the break. | ||
− | # | + | # Hold the bottom section steady and gently rock the top section front to back about 1/4 inch. Don't rock side to side. |
# While rocking, gently ease the top section away from the bottom. | # While rocking, gently ease the top section away from the bottom. | ||
---- | ---- | ||
[[Category:L1 Pro]] | [[Category:L1 Pro]] |
Revision as of 23:18, 1 May 2021
- Question
- How do I separate the sections of the cylindrical radiator?
- Answer
- Wear rubberized work gloves so you can get a good grip on the sections.
- Firmly grasp the sections about 12" above and 3" below the break.
- Hold the bottom section steady and gently rock the top section front to back about 1/4 inch. Don't rock side to side.
- While rocking, gently ease the top section away from the bottom.