Difference between revisions of "Mixer / Numark / CDMix-2"
m (XLR - use a Pad) |
(If you want to use the XLR output, you will likely need to use a Pad for each channel.) |
||
| Line 1: | Line 1: | ||
| + | __NOEDITSECTION__ | ||
| + | <big>'''Numark CDMix-2 Mixer'''</big> | ||
| + | |||
| + | == Summary == | ||
| + | Simplest thing that could possibly work. | ||
| + | |||
| + | '''Use the ¼ inch phone jack outputs (documented as 'to powered monitors') not the XLR-to-XLR (PS1 Powerstand Channels 1 or 2). If you want to use XLR - use a [[Pad]]. | ||
| + | ''' | ||
| + | |||
| + | == Outputs == | ||
| + | |||
=== XLR Balanced +4 === | === XLR Balanced +4 === | ||
{{TooHotForPS1}} | {{TooHotForPS1}} | ||
| + | If you want to use the XLR output, you will likely need to use a [[Pad]] for each channel. | ||
| − | + | ||
| + | === RCA to ¼ Inch === | ||
| + | The RCA outputs provide a signal at a level that is suitable for the ¼ inch phone jack inputs on Power Stand channels 1,2 3 or 4. | ||
| + | |||
| + | To use these you will need an adapter or special cable to convert from RCA to ¼ inch phone jacks. | ||
| + | |||
| + | |||
| + | |||
| + | Links: | ||
| + | * [http://bose.infopop.cc/eve/forums/a/ga/ul/4371069053/NumarkCDMIX2.pdf Manual] | ||
| + | * http://bose.infopop.cc/eve/forums/a/ga/ul/9531079053/inlineimg/Y/NumarkCDMix2Out1a.gif | ||
| + | * http://bose.infopop.cc/eve/forums/a/ga/ul/7931079053/inlineimg/Y/NumarkCDMix2Out1b.gif | ||
| + | |||
| + | More Notes | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ---- | ||
| + | <references/> | ||
| + | |||
| + | [[category:Mixer]] | ||
| + | [[category:Numark]] | ||
Revision as of 21:41, 25 December 2007
Numark CDMix-2 Mixer
Summary
Simplest thing that could possibly work.
Use the ¼ inch phone jack outputs (documented as 'to powered monitors') not the XLR-to-XLR (PS1 Powerstand Channels 1 or 2). If you want to use XLR - use a Pad.
Outputs
XLR Balanced +4
The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.
{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}} If you want to use the XLR output, you will likely need to use a Pad for each channel.
RCA to ¼ Inch
The RCA outputs provide a signal at a level that is suitable for the ¼ inch phone jack inputs on Power Stand channels 1,2 3 or 4.
To use these you will need an adapter or special cable to convert from RCA to ¼ inch phone jacks.
Links:
More Notes