Difference between revisions of "Mixer to Share Presets on the Compact"
m (New page: {{Compact icon}} __NOEDITSECTION__ <noinclude><table><tr> <td valign="top" width="250">__TOC__</td> <td valign="top"> Using a Mixer to allow more than one inputs per Compact channel to use...) |
m |
||
Line 4: | Line 4: | ||
<td valign="top" width="250">__TOC__</td> | <td valign="top" width="250">__TOC__</td> | ||
<td valign="top"> | <td valign="top"> | ||
− | Using a Mixer to allow more than one | + | [[Image:MixerToSharePresetsCompact.jpg|right]] |
+ | Using a Mixer to allow more than one input per Compact channel to use presets. | ||
</td> | </td> | ||
</tr></table> </noinclude> | </tr></table> </noinclude> |
Revision as of 05:44, 5 January 2012
Using a Mixer to allow more than one input per Compact channel to use presets. |
Assumptions
- You have more than two inputs requiring presets.
- Two or more of those inputs are similar, for example: microphones that are of the same make and model.
- You have a stereo mixer or one that has two distinct busses.
General Principles
For the following discussion, a "side" of the mixer is either Left or Right, or it could be a "buss" or "alt" channel routing.
- Pool one group of similar inputs to one side of the mixer.
- Take the pooled output (one side of the mixer) to Power Stand Channel 1 and use a Preset that is appropriate for the input.
- Pool another group of similar inputs to the other side of the mixer. Sometimes the similarity is that these inputs do not share a common Preset - so you will use Preset 00.
- Take the pooled output (the other side of the mixer) to Power Stand Channel 2 and use a Preset that is appropriate for the input, or Preset 00.
Example
2 Vocals, 2 Guitars
You have two vocal microphones - Shure SM 58 - Recommended Preset #14 You have two similar Acoustic Guitars with pickups - Recommended Preset #40
Connections
Microphones
- Run both microphones to the mixer.
- On the input strips for the microphones pan all the way to the LEFT
- Run the Mixer LEFT output to the Power Stand Channel 1
Guitars
- Run both Guitars to the mixer.
- On the input strips for the Guitars pan all the way to the RIGHT
- Run the Mixer RIGHT output to the Power Stand Channel 2
- Set the Compact Channel 2 ToneMatch Switch ON (up position)