Mixer to ToneMatch Mixer

From Bose Portable PA Encyclopedia
Jump to: navigation, search

Connect a third party mixer with left and right outputs to your ToneMatch Mixer[1]. You can use two of the main channels (T4S ToneMatch mixer channels 1, 2, 3, 4 or T8S ToneMatch mixer channels 1, 2, 3, 4, 5, 6, 7, 8.


Main Channels 1, 2, 3, 4 (,5, 6, 7, 8)

If you connect the third party mixer to the main channels you can use:

  • The Master Volume control
  • The Pan/Aux to direct the signals to left and right outputs
  • The trim controls to optimize the signal output from the mixer to match the inputs of the T4S
  • The channel volume controls
  • Presets (e.g., DJ / High Volume Music)
  • zEQ (tone controls)
  • ParaEQ (parametric EQ)
  • Reverb
  • Aux Outputs
  • XLR to XLR cables OR XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables


Aux Inputs 5, 6 (9, 10 (T8S))

If you connect the third party mixer to the Aux inputs you can use:


  • The Master Volume control
  • The Pan/Aux to direct the signals to left and right outputs
  • XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables


Choose the channels that best suit your needs.

Summary
  • If you need signal processing use two of the main channels
  • If you will do all the signal processing and manage the volume on the third party mixer, you can use the Aux inputs