Model II - Can a Stereo Signal Be Used with a 1/4 Jack Input

From Bose Portable PA Encyclopedia FAQ & Wiki
Revision as of 03:56, 29 March 2013 by ST (talk | contribs) (New page: {{Can a Stereo Signal Be Used with a 1/4 Jack Input |Model=Model 1S |Image1=600px |Image2=600px }})
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


A ¼ inch Tip-Ring-Sleeve connector carrying a stereo signal should not be used with the analog input on the Model 1S.

Even though a ¼ inch Tip-Ring-Sleeve connector can carry a stereo signal this is not how this physical connection is used on the Model 1S.

The ¼ inch jack input on the Model 1S is balanced, and will therefore subtract the Left and Right signals on a stereo cable and you will hear almost no signal in the Model 1S.

TRSfromStereoRCAModelII.png

TRSfromStereo14ModelII.png