Difference between revisions of "PS1 Powerstand Connections"
(first edition) |
m |
||
| Line 1: | Line 1: | ||
| − | <big>'''PS1 Connections'''</big> | + | <big>'''PS1 Connections Channels 1 & 2 '''</big> |
| − | |||
== Connections from Mixer == | == Connections from Mixer == | ||
| Line 12: | Line 11: | ||
* use a 20 dB [[Pad]] (attenuator) between the mixer and the Bose System. | * use a 20 dB [[Pad]] (attenuator) between the mixer and the Bose System. | ||
| − | === ¼ Inch Tip-Ring to ¼ Inch Tip-Ring === | + | === ¼ Inch Tip-Ring to ¼ Inch Tip-Ring === |
(unbalanced to unbalanced) is fine: | (unbalanced to unbalanced) is fine: | ||
You could have difficulty if you are running long lines (and losing signal or picking up noise). | You could have difficulty if you are running long lines (and losing signal or picking up noise). | ||
| Line 18: | Line 17: | ||
| − | === XLR (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced) === | + | === XLR (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced) === |
This doesn't do much for you. | This doesn't do much for you. | ||
This is because the ¼ Inch input on the Bose System is Tip-Ring unbalanced anyway. | This is because the ¼ Inch input on the Bose System is Tip-Ring unbalanced anyway. | ||
| − | == Other (not Mixer) == | + | == Other (not Mixer) == |
| − | === ¼ Inch Tip-Ring-Sleeve balanced to XLR balanced === | + | === ¼ Inch Tip-Ring-Sleeve balanced to XLR balanced === |
Specialized instrument cable (probably Guitar) | Specialized instrument cable (probably Guitar) | ||
This is probably a specialty cable that was supplied with the instrument. It is intended for a microphone input on a mixer. This should work fine with the Bose System. | This is probably a specialty cable that was supplied with the instrument. It is intended for a microphone input on a mixer. This should work fine with the Bose System. | ||
| − | === Female XLR to ¼ Inch Tip-Ring === | + | === Female XLR to ¼ Inch Tip-Ring === |
Microphone adapter | Microphone adapter | ||
| Line 35: | Line 34: | ||
The ¼ Inch input was designed for high impedance line-level inputs and may not provide enough gain for a microphone which is probably low impedance. | The ¼ Inch input was designed for high impedance line-level inputs and may not provide enough gain for a microphone which is probably low impedance. | ||
| − | === ¼ Inch Tip-Ring (unbalanced) to XLR (balanced) === | + | === ¼ Inch Tip-Ring (unbalanced) to XLR (balanced) === |
Instrument adapter | Instrument adapter | ||
Revision as of 22:26, 21 August 2006
PS1 Connections Channels 1 & 2
Contents
Connections from Mixer
XLR to XLR
(balanced to balanced) should be fine. Things you can do if the signal is too hot (you are having trouble with the input clipping on the Bose System)...
- check to see if there is a 'pad' built-in on the mixer (most Mackie mixers have this on the panel beside the XLR outs)
- turn down the main outs on the mixer
- use a 20 dB Pad (attenuator) between the mixer and the Bose System.
¼ Inch Tip-Ring to ¼ Inch Tip-Ring
(unbalanced to unbalanced) is fine: You could have difficulty if you are running long lines (and losing signal or picking up noise). If you are, consider using shorter cable runs, or running an balanced line. To do this you can use a short unbalanced cable to a DI (to convert from unbalanced to balanced) and run from there: XLR to XLR (balanced to balanced) to the Bose System.
XLR (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)
This doesn't do much for you. This is because the ¼ Inch input on the Bose System is Tip-Ring unbalanced anyway.
Other (not Mixer)
¼ Inch Tip-Ring-Sleeve balanced to XLR balanced
Specialized instrument cable (probably Guitar)
This is probably a specialty cable that was supplied with the instrument. It is intended for a microphone input on a mixer. This should work fine with the Bose System.
Female XLR to ¼ Inch Tip-Ring
Microphone adapter
This will probably not work very well. Sometimes you see these being used for home karaoke machines. These are not suitable for professional use. The ¼ Inch input was designed for high impedance line-level inputs and may not provide enough gain for a microphone which is probably low impedance.
¼ Inch Tip-Ring (unbalanced) to XLR (balanced)
Instrument adapter
This may not work particularly well. You are probably running an impedance mismatch (high impedance from the instrument to low impedance balanced XLR).
This page was originally posted in the Bose® Musicians Community Message Boards