Difference between revisions of "PS1 Powerstand Connections/Line Out/XLR"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(first ed)
 
m (→‎Line Outs (XLR balanced) for Channels 1 and 2: link to dasiy chain)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
== XLR Line Outs Channels 1 and 2 ==
+
== Line Outs (XLR balanced) for Channels 1 and 2 ==
 
* post trim (+4 dBu nominal)
 
* post trim (+4 dBu nominal)
−
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). Most professional consoles will have a switchable -20 dB pad at the inputs to lower the input level if required.
+
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal).  
  
−
The XLR Line out is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to daisy-chain {{PS1}}s a [[pad]] is recommended.
 
−
 
−
<!--
 
 
[[Image:PS1LineOutXLR.jpg]]
 
[[Image:PS1LineOutXLR.jpg]]
−
-->
 
−
 
−
<html>
 
−
Try moving the mouse over the image below. If you have Java installed, you will see notes related to what you touch with the mouse.
 
−
<br />
 
−
 
−
<APPLET CODEBASE="http://bose.infopop.cc/eve/forums/,s,8206048934,a,ga,ul,5151001421,ic,Y/" CODE="Balloon.class" WIDTH="600" HEIGHT="421">
 
−
<PARAM NAME="IMAGE" VALUE="http://toonz.ca/bose/wiki/images/5/52/PS1LineOutXLR.jpg">
 
−
 
−
<PARAM NAME="HOTSPOT0" VALUE="0, 0,150, 200 ">
 
−
<PARAM NAME="HELPSTRING0" VALUE="Microphone or instrument input">
 
−
 
−
<PARAM NAME="HOTSPOT1" VALUE="175, 0,75, 200 ">
 
−
<PARAM NAME="HELPSTRING1" VALUE="Trim affects signal present at Insert point">
 
−
 
−
<PARAM NAME="HOTSPOT2" VALUE="251, 0,75, 200 ">
 
−
<PARAM NAME="HELPSTRING2" VALUE="Presets have no effect on Line out or Insert">
 
−
 
−
<PARAM NAME="HOTSPOT3" VALUE="326, 0,75, 200 ">
 
−
<PARAM NAME="HELPSTRING3" VALUE="Line out is post Trim, that is, only the Trim setting has any effect on what is passed to the Line Out">
 
−
 
−
 
−
<PARAM NAME="HOTSPOT4" VALUE="400,0, 75,200">
 
−
<PARAM NAME="HELPSTRING4" VALUE="Signal present at 1/2 Insert is affected by Trim and Channel volume on the Remote Control">
 
−
 
−
<PARAM NAME="HOTSPOT5" VALUE="500,200, 80,100">
 
−
<PARAM NAME="HELPSTRING5" VALUE="Volume on Remote affects 1/2 Insert, but NOT Line Out">
 
−
 
−
 
−
<PARAM NAME="ITEMCOUNT" VALUE="5">
 
−
</html>
 
  
 +
This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to connect one {{l1 nl}} to another please see:
 +
[[PS1 Powerstand / Daisy Chain]]
 
----
 
----
 
<references/>
 
<references/>
 
   
 
   
  
−
[[category:L1™ System]]
+
[[category:L1® System]]
 
[[category:PS1 Powerstand]]
 
[[category:PS1 Powerstand]]
 
[[category:PS1 Powerstand Connections]]
 
[[category:PS1 Powerstand Connections]]

Latest revision as of 14:46, 31 December 2008

Line Outs (XLR balanced) for Channels 1 and 2

  • post trim (+4 dBu nominal)

For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal).

PS1LineOutXLR.jpg

This is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to connect one L1® to another please see: PS1 Powerstand / Daisy Chain

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=PS1_Powerstand_Connections/Line_Out/XLR&oldid=10277"