Difference between revisions of "PS1 Powerstand Connections/Line Out/XLR"
(first ed) |
(first ed) |
||
| Line 1: | Line 1: | ||
== XLR Line Outs Channels 1 and 2 == | == XLR Line Outs Channels 1 and 2 == | ||
* post trim (+4 dBu nominal) | * post trim (+4 dBu nominal) | ||
| − | For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). | + | For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to daisy-chain {{PS1}}s use a [[pad]] between the Systems, preferably the "end" of the cable (closest to the System receiving the signal). |
| − | |||
| − | |||
[[Image:PS1LineOutXLR.jpg]] | [[Image:PS1LineOutXLR.jpg]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
---- | ---- | ||
Revision as of 15:04, 14 November 2006
XLR Line Outs Channels 1 and 2
- post trim (+4 dBu nominal)
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). This is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to daisy-chain PS1 Power Stand (Classic) / Model Is use a pad between the Systems, preferably the "end" of the cable (closest to the System receiving the signal).
